22030
1.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY
17126
2.REMOVE NO. 2 SURGE TANK STAY
82121
3.SEPARATE ENGINE WIRE
Remove the 2 bolts and separate the engine wire.
Remove the bolt and separate the earth wire.
17361M
4.DISCONNECT AIR TUBE
Slide the clip and disconnect the air tube from the vacuum pump assembly.
29300
5.REMOVE VACUUM PUMP ASSEMBLY
Remove the 3 bolts and vacuum pump assembly from the engine assembly.
| *1 | No. 2 O-ring |
| *2 | No. 3 O-ring |
Remove the No. 2 O-ring and No. 3 O-ring from the vacuum pump assembly.