Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for RHD) › 2017.09–2017.12
RM33A0E _54 Brake _065366 BRAKE SYSTEM (OTHER) _0319142 BRAKE BOOSTER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for RHD)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Make sure to release vacuum from the brake booster assembly before removing the brake master cylinder sub-assembly from the brake booster assembly.


PROCEDURE

Hide 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 2.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 67913 3.REMOVE FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


Hide 62111A 4.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


Hide 55606 5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 88707 6.SEPARATE SUCTION PIPE SUB-ASSEMBLY

a.
C380314

Disengage the clamp to separate the suction pipe sub-assembly from the brake tube clamp bracket.

NOTICE:
·

Do not deform the refrigerant lines.

·

Do not damage the clamp.




b.
C380315

Disengage the clamp to separate the suction pipe sub-assembly from the engine mounting insulator sub-assembly RH.

NOTICE:
·

Do not deform the refrigerant lines.

·

Do not damage the clamp.




c.
C380311

Remove the bolt and rotate the hook connector as shown in the illustration.


d.

Disconnect the suction pipe sub-assembly from the air conditioning unit assembly.


e.

Remove the O-ring from the suction pipe sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88710E 7.SEPARATE AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY

a.
C380316

Disconnect the connector from the air conditioner tube and accessory assembly.


b.
C380317

Disengage the clamp to separate the air conditioner tube and accessory assembly.

NOTICE:
·

Do not deform the refrigerant lines.

·

Do not damage the clamp.




c.
C380313

Disconnect the air conditioner tube and accessory assembly from the air conditioning unit assembly.


d.

Remove the O-ring from the air conditioner tube and accessory assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 44773F 8.DISCONNECT UNION TO CHECK VALVE HOSE

a.
C380310

Slide the clip and disconnect the union to check valve hose from the brake booster assembly.


Hide 9.LOOSEN LOCK NUT

a.
C380320C01
1.365,0.333 1.552,0.333 1.552,0.333 1.698,1.031 true 2.219,0.417 2.083,0.417 2.083,0.417 1.906,1.115 true 1.198,0.26 1.51,0.417 0.313,0.156 10 false *1 2.25,0.344 2.563,0.5 0.313,0.156 10 false *2
*1 Lock Nut
*2 Brake Master Cylinder Push Rod Clevis


Loosen the lock nut of the brake master cylinder push rod clevis.


Hide 47264A 10.REMOVE PUSH ROD PIN

Hide 11.SEPARATE BRAKE LINE

a.
C380319

Remove the bolt and separate the front brake tube way from the vehicle body.


b.
C380318

Disengage the clamp and separate the No. 2 brake tube clamp from the vehicle body.

NOTICE:

Do not kink or damage the brake lines.



c.

Disengage the 3 clamps to remove the No. 2 brake tube clamp from the brake lines.

NOTICE:

Do not kink or damage the brake lines.



Hide 44610 12.REMOVE BRAKE BOOSTER ASSEMBLY

a.
C380321

Remove the 4 nuts and push the brake booster assembly toward the engine compartment.

NOTICE:

Do not apply excessive force to the brake lines or refrigerant lines.



b.

Remove the brake master cylinder push rod clevis and lock nut from the brake booster assembly.


c.

Remove the brake booster assembly from the vehicle body.

NOTICE:

Do not apply excessive force to the brake lines or refrigerant lines.



Hide 44785 13.REMOVE BRAKE BOOSTER GASKET