Home › Engine / Hybrid System › A25A-FKS (FUEL) › FUEL TANK (w/ Canister Pump Module)
RM33A0E _51 Engine / Hybrid System _065343 A25A-FKS FUEL _0319401 FUEL TANK(w/ Canister Pump Module) A

A25A-FKS FUEL  FUEL TANK(w/ Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 77652A 1.INSTALL NO. 2 FUEL TANK CUSHION

a.

Install 2 new No. 2 fuel tank cushions to the fuel tank assembly.


Hide 77656B 2.INSTALL NO. 6 FUEL TANK CUSHION

a.

Install a new No. 6 fuel tank cushion to the fuel tank assembly.


Hide 77209F 3.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Engage the clamp to install the fuel tank main tube sub-assembly to the fuel tank assembly.


Hide 77100 4.INSTALL FUEL TANK ASSEMBLY

CAUTION:
A344817

The fuel tank assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the fuel tank assembly may fall off the engine lifter.


a.

Set the fuel tank assembly on an engine lifter.

NOTICE:

Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.



b.
A401818N01
2.531,1.958 2.656,2.125 0.125,0.167 10 true 4 2.625,0.01 2.75,0.177 0.125,0.167 10 true 3 0.625,0.01 0.75,0.177 0.125,0.167 10 true 2 0.76,1.969 0.885,2.146 0.125,0.177 10 true 1

Using the engine lifter, slowly raise the fuel tank assembly, and then install the fuel tank assembly, No. 1 fuel tank band sub-assembly LH and No. 1 fuel tank band sub-assembly RH with the 4 bolts in the order shown in the illustration.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)

NOTICE:
·

Be careful not to drop the fuel tank assembly.

·

When installing the fuel tank assembly, tilt it slightly to prevent it from interfering with the surrounding parts.




c.

w/ Fuel Outlet Valve Assembly:

i.

Connect the fuel cut off valve with tube assembly to the fuel outlet valve assembly.

Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION



d.

w/o Fuel Outlet Valve Assembly:

i.

Connect the fuel cut off valve with tube assembly to the canister (charcoal canister assembly).

Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION



Hide 77213E 5.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.

Connect the fuel tank to filler pipe hose to the fuel tank assembly.

Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 6.CONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY

a.

Connect the fuel tank breather tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77209F 7.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Connect the fuel tank main tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77641A 8.INSTALL NO. 1 FUEL TANK PROTECTOR

a.

Install the No. 1 fuel tank protector to the fuel tank assembly with the 4 clips.


Hide 58398F 9.INSTALL NO. 1 FLOOR UNDER COVER

Hide 58399D 10.INSTALL NO. 2 FLOOR UNDER COVER

Hide 17420 11.INSTALL CENTER EXHAUST PIPE ASSEMBLY

Hide 77020A 12.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 13.ADD FUEL