76821A
1.INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH PROTECTOR
When installing the luggage compartment door outside garnish protector, heat the luggage compartment door outside garnish using a heat light.
| Item | Temperature |
|---|---|
| Luggage Compartment Door Outside Garnish | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the luggage compartment door outside garnish excessively.
Clean the luggage compartment door outside garnish.
Remove any remaining double-sided tape from the luggage compartment door outside garnish.
Wipe off any tape adhesive residue with cleaner.
Using a brush or felt, apply primer or equivalent to the luggage compartment door outside garnish protector installation area.
|
Primer | - | - |
Use a clean brush or felt.
Do not touch the luggage compartment door outside garnish until the primer has dried.
Remove the release paper from a new luggage compartment door outside garnish protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Align the luggage compartment door outside garnish protector with the mark on the luggage compartment door outside garnish and install it as shown in the illustration.
| *a | Line | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 1.0 mm (0.0394 in.) | - | - |
Press the luggage compartment door outside garnish protector firmly to install it.
76818
2.INSTALL BACK DOOR OUTSIDE GARNISH PAD (w/o Rear View Monitor System)
When installing the back door outside garnish pad, heat the luggage compartment door outside garnish using a heat light.
| Item | Temperature |
|---|---|
| Luggage Compartment Door Outside Garnish | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the luggage compartment door outside garnish excessively.
Clean the luggage compartment door outside garnish.
Remove any remaining double-sided tape from the luggage compartment door outside garnish.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new back door outside garnish pad.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *1 | Back Door Outside Garnish Pad |
| *2 | Luggage Compartment Door Outside Garnish |
Install the back door outside garnish pad as shown in the illustration.
Press the back door outside garnish pad firmly to install it.
75442
3.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE