Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting)
RM33A0E _51 Engine / Hybrid System _065332 2GR-FKS ENGINE CONTROL _0326378 VACUUM SWITCHING VALVE(for Engine Mounting) A

2GR-FKS ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  INSTALLATION  


PROCEDURE

Hide 17650H 1.INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

a.

Install the vacuum switching valve (for active control engine mount system) to the front engine mounting insulator with the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Connect the 3 vacuum hoses to the vacuum switching valve (for active control engine mount system).


c.

Engage the wire harness clamp and connect the vacuum switching valve (for active control engine mount system) connector.


d.

Install the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


e.

Engage the wire harness clamp and install the engine wire with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 2.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 17750A 3.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 53295E 4.INSTALL COOL AIR INTAKE DUCT SEAL