Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM33A0E _51 Engine / Hybrid System _065332 2GR-FKS ENGINE CONTROL _0326387 ENGINE COOLANT TEMPERATURE SENSOR A

2GR-FKS ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.

NOTICE:

If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.



b.

Install the engine coolant temperature sensor to the water outlet with the clip.

NOTICE:
·

If the engine coolant temperature sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.




c.

Connect the engine coolant temperature sensor connector.


Hide 17705 2.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 3.ADD ENGINE COOLANT

Hide 5.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION