33820B
1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
Pass the transmission control cable assembly into the vehicle and install the transmission control cable assembly to the vehicle body with the 2 nuts.
Connect the transmission control cable assembly to the vehicle body with the 2 nuts.
Connect the transmission control cable assembly to the No. 1 transmission control cable bracket with a new clip.
Connect the transmission control cable assembly to the transmission control shaft lever with the nut.
Before installing the transmission control cable assembly, check that the park/neutral position switch assembly and shift lever are in N.
58861B
2.INSTALL NO. 1 CONSOLE BOX DUCT
Install the No. 1 console box duct.
3.INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY
58152A
4.INSTALL FRONT LOWER NO. 1 FLOOR HEAT INSULATOR
Install the front lower No. 1 floor heat insulator to the vehicle body with the 2 nuts.
17410
5.INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)
74404A
6.INSTALL BATTERY CLAMP SUB-ASSEMBLY
89661
7.INSTALL ECM
28800
8.INSTALL BATTERY
9.INSPECT SHIFT LEVER POSITION
10.ADJUST SHIFT LEVER POSITION