Home › General › MAINTENANCE › BRAKE VACUUM HOSE (for RHD) › 2017.09–2017.12
RM33A0E _V1 General _065356 MAINTENANCE _0327422 BRAKE VACUUM HOSE(for RHD) A

MAINTENANCE  BRAKE VACUUM HOSE(for RHD)  INSTALLATION  


PROCEDURE

Hide 44773F 1.INSTALL UNION TO CHECK VALVE HOSE

a.

Install the 2 clips to the union to check valve hose.


b.
C375962C01
0.865,1.146 0.865,0.969 true 0.823,0.771 0.677,0.542 0.677,0.542 0.531,0.542 true 2.885,3.865 2.573,3.865 true 0.344,0.469 0.521,0.646 0.177,0.177 10 true *1 2.896,3.781 3.083,3.948 0.188,0.167 10 true *a 0.792,1.135 0.958,1.302 0.167,0.167 10 true *a
*1 Vacuum Hose Clamp
*a Paint Mark


Connect the union to check valve hose to the intake manifold and slide the clip to secure it.

NOTICE:
·

When connecting the union to check valve hose, face the paint mark up.

·

Make sure that the tabs of the clip are facing upward.




c.

Install the union to check valve hose to the vacuum hose clamp.

NOTICE:

When installing the union to check valve hose to the vacuum hose clamp, make sure to align the paint mark with the vacuum hose clamp as shown in the illustration.



d.
C375961C01
1.281,1.188 1.281,0.75 true 1.208,1.188 1.385,1.365 0.177,0.177 10 true *a
*a Paint Mark


Connect the union to check valve hose to the brake booster assembly and slide the clip to secure it.

NOTICE:
·

When connecting the union to check valve hose, face the paint mark up.

·

Make sure that the tabs of the clip are facing upward.




Hide 53607A 2.INSTALL FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY

Hide 55708 3.INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY