Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Fold Down Seat Type) › 2017.09–2018.04
RM33A0E _58 Vehicle Interior _065385 SEAT _0327858 REAR SEAT ASSEMBLY(for Fold Down Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Fold Down Seat Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71075B 1.INSTALL BENCH TYPE REAR SEAT CUSHION COVER

HINT:

When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.

Engage the 24 claws.

B470158

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



b.

Engage the 20 hooks.

B470156

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



c.

Using hog ring pliers, install 2 new hog rings.

B478404

NOTICE:
·

Be careful not to damage the bench type rear seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.




d.

Using hog ring pliers, install 6 new hog rings.

B478405

NOTICE:
·

Be careful not to damage the bench type rear seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.




e.

Engage the 6 hooks.

B470153

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



f.

Engage the 4 fasteners to install the bench type rear seat cushion cover to the rear seat cushion pad sub-assembly.

B470152C11
0,0 0,0 false
V100155

Fastener - -


NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



Hide 73733 2.INSTALL CHILD RESTRAINT SEAT BASE COVER

a.
B474270C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide and claw as shown in the illustration.


b.

Install the child restraint seat base cover with the screw.

HINT:

Use the same procedure for all child restraint seat base cover.



Hide 73731 3.INSTALL CHILD RESTRAINT SEAT COVER

a.
B470149C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and 2 claws to install the child restraint seat cover as shown in the illustration.

HINT:

Use the same procedure for all child restraint seat covers.



Hide 71078S 4.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

HINT:

When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.

w/o Removable Headrest:

i.
B470052

Engage the 6 claws to install the separate type rear seatback cover to the separate type rear seatback pad.

NOTICE:

Be careful not to damage the separate type rear seatback cover.




b.

w/ Removable Headrest:

i.
B480578

Engage the 5 claws to install the separate type rear seatback cover to the separate type rear seatback pad.

NOTICE:

Be careful not to damage the separate type rear seatback cover.




Hide 71931A 5.INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)

a.

w/ Removable Headrest:

i.
B480576C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.



Hide 6.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.
B474273C01
0,0 0,0 false
V113147

Install in this Direction


Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH as shown in the illustration.


b.
B470048

Engage the 4 hooks.


c.
B480574C02
1.229,1.167 1.469,1.323 true 2,1.469 2.24,1.229 true 1.5,1.25 1.708,1.417 0.208,0.167 10 true *a 1.781,1.406 1.969,1.573 0.188,0.167 10 true *a
*a Fastener


Close the 2 fasteners as shown in the illustration.


Hide 72667 7.INSTALL REAR SEATBACK UPPER LOCK BEZEL (for LH Side)

a.
B480572

Engage the 4 claws to install a new rear seatback upper lock bezel.


Hide 71077S 8.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

HINT:

When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.

w/o Removable Headrest:

i.
B470147

Engage the 6 claws.

NOTICE:

Be careful not to damage the separate type rear seatback cover.




b.

w/ Removable Headrest:

i.
B480589

Engage the 5 claws.

NOTICE:

Be careful not to damage the separate type rear seatback cover.




c.
B470145

Engage the 6 guides to install the separate type rear seatback cover to the separate type rear seatback pad.

NOTICE:

Be careful not to damage the separate type rear seatback cover.



Hide 71931A 9.INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)

a.

w/ Removable Headrest:

i.
B480587C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.



Hide 10.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

a.
B474274C01
0,0 0,0 false
V113147

Install in this Direction


Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH as shown in the illustration.


b.
B470142

Engage the 6 hooks.


c.
B470141C01
0.948,1.167 1.219,1.281 true 2.073,1.354 2.365,1.302 true 1.25,1.208 1.469,1.396 0.219,0.188 10 true *a 1.844,1.281 2.063,1.469 0.219,0.188 10 true *a
*a Fastener


Close the 2 fasteners as shown in the illustration.


Hide 72667 11.INSTALL REAR SEATBACK UPPER LOCK BEZEL (for RH Side)

a.
B480583

Engage the 4 claws to install a new rear seatback upper lock bezel.


Hide 73345 12.INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)

a.
B480582

Engage the guide.


b.

Install the rear seat center shoulder belt guide with the 2 screws.


Hide 72087A 13.INSTALL REAR SEAT CENTER ARMREST COVER SUB-ASSEMBLY (for RH Side)

HINT:

When installing a rear seat center armrest cover sub-assembly, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.
B470138C01
1.833,1.948 2.313,1.417 true 2.344,1.333 2.573,1.552 0.229,0.219 10 false *a
*a Fastener


Install the rear seat center armrest cover sub-assembly to the rear seat center armrest pad sub-assembly and close the fastener as shown in the illustration.

NOTICE:

Be careful not to damage the rear seat center armrest cover sub-assembly.



Hide 72806D 14.INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for RH Side)

a.

for Type A:

i.
B480607

Install the 2 screws and rear seat center armrest cup holder sub-assembly.



b.

for Type B:

i.
B491652C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides as shown in the illustration.


ii.
B474272C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws to install the rear seat center armrest cup holder sub-assembly as shown in the illustration.



Hide 72987 15.INSTALL REAR SEAT CENTER ARMREST COVER (for RH Side)

a.

for Type A:

i.
B480606

Install the rear seat center armrest cover.



Hide 72860 16.INSTALL REAR SEAT CENTER ARMREST BOX ASSEMBLY (for RH Side)

a.

for Type A:

i.
B480605

Engage the 4 claws to install the rear seat center armrest box assembly.



Hide 72830 17.INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)

a.
B470061C01
0,0 0,0 false
V113147

Install in this Direction


Install the bush as shown in the illustration.


b.
B480581C02
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the pin and temporarily install the rear seat center armrest assembly as shown in the illustration.


c.
B480579

Install the rear seat center armrest assembly with the bush and bolt.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 71349C 18.INSTALL REAR SEATBACK HINGE COVER (for RH Side)

a.
B470054C04
0,0 0,0 false
V113147

Install in this Direction


Engage the pin.


b.

Engage the 2 claws to install the rear seatback hinge cover as shown in the illustration.


Hide 71089A 19.INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)

a.

Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.


Hide 73940A 20.INSTALL REAR SEAT AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag)

Hide 21.INSTALL REAR SIDE SEATBACK COVER WITH PAD (for LH Side)

a.
B472321C01
0,0 0,0 false
V113147

Install in this Direction


Install the rear side seatback cover with pad to the rear side seatback frame sub-assembly LH as shown in the illustration.


b.
B470037

Engage the 15 hooks.


c.

w/ Rear Seat Side Airbag:

i.
B471641

Install the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)



Hide 73344 22.INSTALL REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)

a.
B470034

Engage the guide.


b.

Install the rear seat shoulder belt guide LH with the 2 screws.


Hide 71088A 23.INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 73930A 24.INSTALL REAR SEAT AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)

HINT:

Use the same procedure as for the LH side.


Hide 25.INSTALL REAR SIDE SEATBACK COVER WITH PAD (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 73343 26.INSTALL REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)

HINT:

Use the same procedure as for the LH side.