Home › General › MAINTENANCE › 2GR-FKS SPARK PLUG
RM33A0E _V1 General _065356 MAINTENANCE _0327932 2GR-FKS SPARK PLUG A

MAINTENANCE  2GR-FKS SPARK PLUG  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during spark plug removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
·

Replacement of ignition coil assembly

·

Replacement of spark plug


Inspection after repair
·

Poor idle, etc.

·

Engine start function, etc.


(Click here)

PROCEDURE

Hide 11209 1.REMOVE V-BANK COVER SUB-ASSEMBLY

Hide 19100P 3.REMOVE SPARK PLUG

a.
A405621

Remove the 6 spark plugs from the cylinder head sub-assembly and cylinder head LH.

NOTICE:

If a spark plug has been struck or dropped, replace it.


HINT:

Arrange the removed parts in the correct order.