12204
1.INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
Apply a light coat of engine oil to the O-ring.
Using a 22 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly) to the cylinder head cover sub-assembly LH.
When reusing the PCV valve (ventilation valve sub-assembly), inspect the O-ring.
12261
2.CONNECT VENTILATION HOSE
Connect the ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.
11209
3.INSTALL V-BANK COVER SUB-ASSEMBLY