Home › Engine / Hybrid System › 2AR-FE EMISSION CONTROL › PCV VALVE › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065326 2AR-FE EMISSION CONTROL _0328635 PCV VALVE A

2AR-FE EMISSION CONTROL  PCV VALVE  INSTALLATION  


PROCEDURE

Hide 12204 1.INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

a.
A092670C09
2.281,0.646 2.125,0.188 2.125,0.188 1.865,0.188 false 1.667,0.104 1.854,0.302 0.188,0.198 10 false *a
*a Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent


Apply adhesive to 2 or 3 threads of the PCV valve (ventilation valve sub-assembly).

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



b.

Using a 19 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly) to the ventilation case sub-assembly.

Torque:
27 N*m (275 kgf*cm, 20 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.



c.

Connect the No. 2 ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.