Home › Engine / Hybrid System › 2GR-FKS (LUBRICATION) › OIL PRESSURE SWITCH
RM33A0E _51 Engine / Hybrid System _065338 2GR-FKS LUBRICATION _0328791 OIL PRESSURE SWITCH A

2GR-FKS LUBRICATION  OIL PRESSURE SWITCH  REMOVAL  


PROCEDURE

Hide 53736 1.REMOVE FRONT FENDER APRON SEAL RH

Hide 83530 3.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A406891C01
1.927,0.917 2.104,0.375 2.104,0.375 2.333,0.375 true 2.365,0.281 2.604,0.469 0.24,0.188 10 true *1
*1 Wire Harness Protector


Disengage the clamp to disconnect the wire harness protector.


b.

Disconnect the engine oil pressure switch assembly connector.


c.
A406892

Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.