28100
1.INSTALL STARTER ASSEMBLY
Install the starter assembly with the 2 bolts.
Connect the engine wire to the terminal 30 with the nut.
Close the terminal cap.
Connect the starter assembly connector.
74404A
2.INSTALL BATTERY CLAMP SUB-ASSEMBLY
89661
3.INSTALL ECM
17700
4.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
17750A
5.INSTALL INLET AIR CLEANER ASSEMBLY
11209
6.INSTALL V-BANK COVER SUB-ASSEMBLY
53295E
7.INSTALL COOL AIR INTAKE DUCT SEAL
8.INSTALL BATTERY