Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM WARNING SWITCH › 2017.12–2018.04
RM33A0E _54 Brake _065366 BRAKE SYSTEM (OTHER) _0319136 VACUUM WARNING SWITCH A

BRAKE SYSTEM (OTHER)  VACUUM WARNING SWITCH  INSTALLATION  


PROCEDURE

Hide 44696 1.INSTALL CHECK VALVE GROMMET

a.

Install a new check valve grommet to the brake booster assembly.


Hide 83390H 2.INSTALL VACUUM WARNING SWITCH ASSEMBLY

a.

for LHD:

i.
C372745C01
1.156,1.135 1.354,1.323 0.198,0.188 10 true *a
*a 30° +/- 20°
V100136

Up


Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.


ii.

Connect the connector to the vacuum warning switch assembly.



b.

for RHD:

i.
C376022C01
2.365,1.177 2.552,1.354 0.188,0.177 10 true *a
*a 30° +/- 10°
V100136

Up


Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.


ii.

Connect the connector to the vacuum warning switch assembly.



Hide 28800 3.INSTALL BATTERY (for LHD)

Hide 53607A 4.INSTALL FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY (for RHD)

Hide 55708 5.INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for RHD)