Home › General › MAINTENANCE › BRAKE VACUUM HOSE (for RHD) › 2017.12–2021.02
RM33A0E _V1 General _065356 MAINTENANCE _0327422 BRAKE VACUUM HOSE(for RHD) A

MAINTENANCE  BRAKE VACUUM HOSE(for RHD)  REMOVAL  


PROCEDURE

Hide 55708 1.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

Hide 53607A 2.REMOVE FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY

Hide 44773F 3.REMOVE UNION TO CHECK VALVE HOSE (for 2AR-FE)

a.
C375961

Slide the clip and disconnect the union to check valve hose from the brake booster assembly.


b.
C375962

Separate the union to check valve hose from the vacuum hose clamp.


c.

Slide the clip and disconnect the union to check valve hose from the intake manifold.


d.

Remove the 2 clips from the union to check valve hose.


Hide 44773F 4.REMOVE UNION TO CHECK VALVE HOSE (for 2GR-FKS)

a.
C375952

Slide the clip and disconnect the union to check valve hose from the brake booster assembly.


b.
C375953

Slide the clip and disconnect the union to check valve hose from the air delivery way.


c.

Remove the 2 clips from the union to check valve hose.


Hide 17361M 5.REMOVE AIR TUBE (for 2GR-FKS)

a.
C375948

Disconnect the 2 vacuum transmitting hose assemblies from the air delivery way.


b.
C375946

Slide the clip and disconnect the air tube from the vacuum pump assembly.


c.
C375949

Slide the clip and disconnect the air tube from the air delivery way.


d.

Remove the 2 clips from the air tube.


e.
C375951

Disengage the clamp to remove the air delivery way from the intake air surge tank assembly.