Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Manual Air Conditioning System) › from 2017.12
RM33A0E _58 Vehicle Interior _065387 HEATING / AIR CONDITIONING _0341905 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  B1443  Air Outlet Damper Control Servo Motor Circuit  


DESCRIPTION

The No. 1 air conditioning radiator damper servo sub-assembly (mode) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air outlet damper to the appropriate position, which controls the air outlet switching.

The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1443 Air Outlet Damper Control Servo Motor Circuit Air outlet damper position sensor value does not change even if air conditioning amplifier assembly operates No. 1 air conditioning radiator damper servo sub-assembly (mode)
·

No. 1 air conditioning radiator damper servo sub-assembly (mode)

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly

·

Air conditioning radiator assembly


Memorized
(30 sec. or more)*

*: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.


DTC Detection Condition Combination Table
Vehicle Condition
Pattern 1 Pattern 2
Diagnosis Condition No. 1 air conditioning radiator damper servo sub-assembly (mode) operating ○ ○
Malfunction Air outlet damper servo operation request signals are output but the air outlet damper position sensor value does not change ○ -
Air outlet damper servo operation request signals are output but the air outlet damper position sensor value is abnormal - ○
Detection Time Continuously for 30 seconds or more Continuously for 30 seconds or more
Trip Count 1 trip 1 trip

HINT:

If the conditions of either of these patterns are detected, a DTC will be stored.


WIRING DIAGRAM

E369049E05
0.948,1.521 1.563,1.698 0.615,0.177 10 false Air Mix 0.979,3.438 1.604,3.677 0.625,0.24 10 false Mode 0.427,6.104 3.021,6.313 2.594,0.208 10 false No. 1 Blower Damper Servo Sub-assembly 0.396,4.229 3.177,4.583 2.781,0.354 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly 3.469,6.104 5.042,6.479 1.573,0.375 10 false Air Conditioning Harness Assembly 5.542,6.115 7.104,6.469 1.563,0.354 10 false Air Conditioning Amplifier Assembly 0.792,6.438 2.406,6.615 1.615,0.177 10 false : LIN Communication Line 6.625,0.365 6.938,0.563 0.313,0.198 10 false +B 6.76,1.385 6.958,1.573 0.198,0.188 10 false IC 2.573,2.729 2.979,2.938 0.406,0.208 10 false STE2 2.573,2.917 2.979,3.125 0.406,0.208 10 false STE1 2.74,3.115 3,3.302 0.26,0.188 10 false M- 2.729,3.458 2.99,3.646 0.26,0.188 10 false M+ 2.646,3.646 2.979,3.823 0.333,0.177 10 false GND 3.031,2.615 3.219,2.813 0.188,0.198 10 false 6 3.042,2.833 3.229,3.031 0.188,0.198 10 false 5 3.042,3.042 3.229,3.24 0.188,0.198 10 false 8 3.052,3.448 3.24,3.646 0.188,0.198 10 false 7 3.052,3.635 3.24,3.833 0.188,0.198 10 false 4 2.625,4.885 2.958,5.063 0.333,0.177 10 false GND 2.719,5.094 2.979,5.281 0.26,0.188 10 false M+ 2.74,5.281 3,5.469 0.26,0.188 10 false M- 2.625,5.479 3.031,5.688 0.406,0.208 10 false sigA 2.635,5.677 2.969,5.875 0.333,0.198 10 false sigB 3.042,4.875 3.229,5.073 0.188,0.198 10 false 1 3.052,5.083 3.24,5.281 0.188,0.198 10 false 4 3.052,5.292 3.24,5.49 0.188,0.198 10 false 5 3.052,5.49 3.24,5.688 0.188,0.198 10 false 2 3.052,5.688 3.24,5.885 0.188,0.198 10 false 3 0.125,4.229 0.313,4.427 0.188,0.198 10 false A 0.146,6.094 0.333,6.292 0.188,0.198 10 false B

CAUTION / NOTICE / HINT

HINT:
·

Confirm that no mechanical problems are present because this DTC can be stored when either a damper link or damper is mechanically locked.

·

When installing a damper servo motor, make sure to install it correctly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>REASSEMBLY

·

After replacing a damper servo motor, make sure to perform Servo Motor Initialization.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)>INITIALIZATION



PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Air Conditioner > Trouble Codes
50001 121

Result:
Result Proceed to
Only DTC B1497 is output A
DTC B1441, B1442 and B1443 are output B
Only DTC B1443 is output C



A

B

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

C

2.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)
2.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)
a.

Check that the No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>REASSEMBLY

OK:

The No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.



Result:
Proceed to
OK
NG



OK

3.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)

NG

INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY CORRECTLY

3.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)
a.

Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.



Result:
Proceed to
OK
NG



OK

4.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

NG

REMOVE PINCHED WIRE HARNESS

4.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)
a.

Remove the No. 1 air conditioning radiator damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY


b.

Operate the dampers by hand.

OK:

The dampers are easily operated by hand.



Result:
Proceed to
OK
NG



OK

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

NG

REPLACE AIR CONDITIONING RADIATOR ASSEMBLY