Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM(for 2AR-FE RH Side) › 2017.12–2018.04
RM33A0E _53 Suspension _065361 FRONT SUSPENSION _0327270 FRONT LOWER SUSPENSION ARM(for 2AR-FE RH Side) A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM(for 2AR-FE RH Side)  INSTALLATION  


PROCEDURE

Hide 48068 1.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

a.

Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly RH.


b.
C373238N01
2.729,0.375 2.885,0.573 0.156,0.198 10 true 1 0.688,0.865 0.844,1.063 0.156,0.198 10 false 3 2.083,0.146 2.24,0.344 0.156,0.198 10 true 2

Install the front lower No. 1 suspension arm sub-assembly RH to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

Torque:
Bolt (1), (2) : 200 N*m (2039 kgf*cm, 148 ft.*lbf)
Bolt (3) : 135 N*m (1377 kgf*cm, 100 ft.*lbf)

NOTICE:

Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.



c.

Connect the front lower No. 1 suspension arm sub-assembly RH to the front lower ball joint assembly RH with the bolt and 2 nuts.

Torque:
92 N*m (938 kgf*cm, 68 ft.*lbf)


Hide 53736 2.INSTALL FRONT FENDER APRON SEAL RH

Hide 3.INSTALL FRONT WHEEL

Hide 4.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Hide 5.PERFORM INITIALIZATION

Parking assist monitor system (Click here)for Initialization
(Click here)for Calibration
Lighting System (EXT) (w/ Automatic Headlight Beam Level Control System) (Click here)