Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER › 2018.04–2021.02
RM33A0E _56 Audio / Visual / Telematics _065373 AUDIO / VIDEO _0318987 RADIO RECEIVER A

AUDIO / VIDEO  RADIO RECEIVER  INSTALLATION  


PROCEDURE

Hide 1. PRECAUTION (for Radio and Display Type)

a.

w/o Navigation System:

NOTICE:
·

When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:

-

A communication malfunction DTC may be stored.

-

The radio and display receiver assembly may not operate normally.





b.

w/ Navigation System:

NOTICE:
·

When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:

-

A communication malfunction DTC may be stored.

-

The radio and display receiver assembly or navigation ECU may not operate normally.


·

After replacing the radio and display receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.




Hide 86120N 2.INSTALL RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

Hide 86140A 3.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

Hide 4.INSTALL NAVIGATION ECU WITH WIRE (w/ Navigation System)

Hide 86212C 5.INSTALL NO. 2 RADIO RECEIVER BRACKET

a.

w/o Navigation System:

i.

Install the No. 2 radio receiver bracket with the 3 screws.



b.

w/ Navigation System:

i.

Install the No. 2 radio receiver bracket with the 5 screws.



Hide 86211J 6.INSTALL NO. 1 RADIO RECEIVER BRACKET

a.

w/o Navigation System:

i.

Install the No. 1 radio receiver bracket with the 3 screws.



b.

w/ Navigation System:

i.

Install the No. 1 radio receiver bracket with the 5 screws.



Hide 7.CONNECT NAVIGATION ECU WITH WIRE (w/ Navigation System)

a.

Connect the 2 connectors to connect the navigation ECU with wire.


Hide 86453 8.INSTALL MULTI-MEDIA MODULE WIRE (for Radio and Display Type with 8 Inch Display)

a.

Engage the claw.


b.

Connect the connector to install the multi-media module wire.


Hide 83910G 9.INSTALL CLOCK ASSEMBLY (for Radio Receiver Type)

Hide 83950M 10.INSTALL TELLTALE LIGHT ASSEMBLY (for Radio and Display Type with 7 Inch Display)

Hide 11.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

a.

Connect each connector.


b.

Engage the 2 guides to temporarily install the radio receiver assembly with bracket as shown in the illustration.

E381024C01
0,0 0,0 false
V113147

Install in this Direction - -



c.

Engage the 5 clips as shown in the illustration.

E381025C01
0,0 0,0 false
V113147

Install in this Direction - -



d.

Engage the 4 clips in the order shown in the illustration.

E381026C01
3.833,0.635 3.99,0.833 0.156,0.198 10 true 1 4.635,0.688 4.792,0.885 0.156,0.198 10 true 2 5.542,0.76 5.698,0.958 0.156,0.198 10 true 3 6.625,0.823 6.781,1.021 0.156,0.198 10 true 4
V113147

Install in this Direction - -



e.

Install the radio receiver assembly with bracket with the 4 bolts.


Hide 12.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type with 7 Inch Display)

a.

Connect each connector.


b.

Engage the 2 guides to temporarily install the radio and display receiver assembly with bracket as shown in the illustration.

E372247C01
0,0 0,0 false
V113147

Install in this Direction - -



c.

Engage the 5 clips as shown in the illustration.

E372244C01
0,0 0,0 false
V113147

Install in this Direction - -



d.

Engage the 4 clips in the order shown in the illustration.

E372245C01
3.813,0.635 3.969,0.833 0.156,0.198 10 true 1 4.646,0.688 4.802,0.885 0.156,0.198 10 true 2 5.552,0.74 5.708,0.938 0.156,0.198 10 true 3 6.615,0.792 6.771,0.99 0.156,0.198 10 true 4
V113147

Install in this Direction - -



e.

Install the radio and display receiver assembly with bracket with the 4 bolts.


Hide 13.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type with 8 Inch Display)

a.

Connect each connector.


b.

Engage the 2 guides to temporarily install the radio and display receiver assembly with bracket as shown in the illustration.

E365872C01
0,0 0,0 false
V113147

Install in this Direction - -



c.

Engage the 7 clips as shown in the illustration.

E365873C01
0,0 0,0 false
V113147

Install in this Direction - -



d.

Engage the 4 clips in the order shown in the illustration.

E365874C01
3.656,0.688 3.813,0.885 0.156,0.198 10 true 1 4.385,0.74 4.542,0.938 0.156,0.198 10 true 2 5.177,0.792 5.333,0.99 0.156,0.198 10 true 3 6.031,0.844 6.188,1.042 0.156,0.198 10 true 4
V113147

Install in this Direction - -



e.

Install the radio and display receiver assembly with bracket with the 4 bolts.


Hide 55900 14.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (except Radio and Display Type with 8 Inch Display)

Hide 55670 15.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55480D 16.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Hide 55012A 17.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

Hide 55435B 18.INSTALL NO. 1 METER HOOD CLUSTER

Hide 19. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)