Home › Audio / Visual / Telematics › TELEMATICS › MAYDAY BATTERY › 2018.04–2021.02
RM33A0E _56 Audio / Visual / Telematics _072211 TELEMATICS _0351486 MAYDAY BATTERY A

TELEMATICS  MAYDAY BATTERY  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during mobile phone battery removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Mobilephone battery Reset mobilephone battery condition Emergency call service (Click here)

PROCEDURE

Hide 86740 2.REMOVE TELEMATICS TRANSCEIVER

Hide 86725 3.REMOVE MOBILE PHONE BATTERY

a.
E352769C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Loosen the 2 screws.

HINT:

The 2 screws cannot be removed because they are integrated into the battery cover sub-assembly.



b.

Disengage the 2 claws and 3 guides as shown in the illustration to remove the battery cover sub-assembly.


c.

Lift the battery, disconnect the connector and remove the battery as shown in the illustration.

E352767C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)