Home › Engine / Hybrid System › 6AR-FSE (ENGINE CONTROL) › ENGINE OIL TEMPERATURE SENSOR › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072203 6AR-FSE ENGINE CONTROL _0351520 ENGINE OIL TEMPERATURE SENSOR A

6AR-FSE ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 53295E 2.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 17750A 3.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 89429F 4.REMOVE ENGINE OIL TEMPERATURE SENSOR

a.
A413353

Disconnect the engine oil temperature sensor connector.


b.
A413354N01
1.927,1.531 2.375,1.531 true 2.406,1.438 2.865,1.635 0.458,0.198 10 true SST

Using SST, remove the engine oil temperature sensor from the water inlet housing sub-assembly.

SST
09817-33191  

NOTICE:

If the engine oil temperature sensor has been struck or dropped, replace it.



c.

Remove the gasket from the engine oil temperature sensor.