Home › Vehicle Exterior › DOOR / HATCH › HOOD › from 2018.04
RM33A0E _59 Vehicle Exterior _065392 DOOR / HATCH _0326911 HOOD A

DOOR / HATCH  HOOD  DISASSEMBLY  


PROCEDURE

Hide 53381 1.REMOVE HOOD TO RADIATOR SUPPORT SEAL

a.
B469183

Using a clip remover, disengage the 10 hood to radiator support seal clips to remove the hood to radiator support seal.


b.

Remove the 10 hood to radiator support seal clips from the hood to radiator support seal.


Hide 53341B 2.REMOVE HOOD INSULATOR

a.
B469184

Using a clip remover, remove the 9 hood insulator clips.


b.

Disengage the 2 guides to remove the hood insulator.


Hide 85035 3.REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/o Heater)

Hide 4.REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/ Heater)

Hide 5.DISCONNECT WASHER HOSE ASSEMBLY (w/o Heater)

a.
B469185

Disengage the 5 clamps.


b.

Disengage the grommet and disconnect the washer hose assembly.


Hide 6.DISCONNECT WASHER HOSE ASSEMBLY (w/ Heater)

a.
B509100

Disengage the 5 clamps.


b.

Disengage the grommet and disconnect the washer hose assembly.


Hide 53450A 7.REMOVE HOOD SUPPORT ASSEMBLY LH

Hide 53337C 8.REMOVE HOOD STAY BRACKET LH

Hide 53440A 9.REMOVE HOOD SUPPORT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 53336 10.REMOVE HOOD STAY BRACKET RH

HINT:

Use the same procedure as for the LH side.