Home › Vehicle Exterior › DOOR / HATCH › HOOD › from 2018.04
RM33A0E _59 Vehicle Exterior _065392 DOOR / HATCH _0326911 HOOD A

DOOR / HATCH  HOOD  REASSEMBLY  


PROCEDURE

Hide 53337C 1.INSTALL HOOD STAY BRACKET LH

Hide 53450A 2.INSTALL HOOD SUPPORT ASSEMBLY LH

Hide 53336 3.INSTALL HOOD STAY BRACKET RH

HINT:

Use the same procedure as for the LH side.


Hide 53440A 4.INSTALL HOOD SUPPORT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 5.CONNECT WASHER HOSE ASSEMBLY (w/o Heater)

a.
B469185

Engage the grommet.


b.

Engage the 5 clamps to connect the washer hose assembly.


Hide 6.CONNECT WASHER HOSE ASSEMBLY (w/ Heater)

a.
B509100

Engage the grommet.


b.

Engage the 5 clamps to connect the washer hose assembly.


Hide 85035 7.INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/o Heater)

Hide 8.INSTALL WASHER NOZZLE SUB-ASSEMBLY (w/ Heater)

Hide 85035 9.INSPECT WASHER NOZZLE SUB-ASSEMBLY

Hide 85035 10.ADJUST WASHER NOZZLE SUB-ASSEMBLY

Hide 53341B 11.INSTALL HOOD INSULATOR

a.
B469184

Engage the 2 guides.


b.

Install the hood insulator with 9 new hood insulator clips.


Hide 53381 12.INSTALL HOOD TO RADIATOR SUPPORT SEAL

a.
B469183

Install the hood to radiator support seal with 10 new hood to radiator support seal clips.