Home › Engine / Hybrid System › 6AR-FSE (FUEL) › FUEL PUMP › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _072204 6AR-FSE FUEL _0353738 FUEL PUMP A

6AR-FSE FUEL  FUEL PUMP  REASSEMBLY  


PROCEDURE

Hide 23220A 1.INSTALL FUEL PUMP WITH FILTER ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing the fuel pump with filter assembly.

Click hereEngine / Hybrid System>6AR-FSE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.
A405921C01
2.406,0.969 2.521,0.76 2.521,0.76 2.615,0.76 false 2.406,1.125 2.667,1.125 false 2.667,0.677 2.979,0.833 0.313,0.156 10 false *1 2.729,1.042 3.042,1.198 0.313,0.156 10 false *2
*1 O-ring
*2 Fuel Pump Spacer


Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump with filter assembly.


b.

Connect the fuel pump harness connector to install the fuel pump harness to the fuel pump with filter assembly.


c.

Engage the 5 claws to install the fuel pump with filter assembly to the fuel filter.

NOTICE:
·

Make sure that the O-ring is not cut or pinched during the installation.

·

Securely engage the claws.




d.

Engage the 2 claws to install the No. 1 fuel suction support to the fuel filter.


e.

Engage the 2 claws to install the fuel filter to the fuel sub-tank.

NOTICE:
·

Do not apply excessive force to the tube or No. 1 fuel suction support.

·

Securely engage the claws.




f.
A405922

Engage the clamp and claw, and connect the fuel pump filter hose while aligning it with the installation position of the fuel sub-tank.

NOTICE:

Securely engage the clamp and claw.



g.

Connect the fuel pump harness connector.


Hide 83320 2.INSTALL FUEL SENDER GAUGE ASSEMBLY