88051A
1.INSTALL ION GENERATOR SUB-ASSEMBLY
Install the ion generator sub-assembly to the No. 1 ion generator bracket with the 3 screws.
87201N
2.INSTALL AIR DUCT SUB-ASSEMBLY (for LHD)
|
Install in this Direction |
Install the air duct sub-assembly with the screw as shown in the illustration.
3.INSTALL ION GENERATOR WITH BRACKET
Engage the 2 guides.
Install the ion generator with bracket with the 2 screws.
Connect the connector.
87201N
4.INSTALL AIR DUCT SUB-ASSEMBLY (for RHD)
|
Install in this Direction |
Install the air duct sub-assembly with the screw as shown in the illustration.
55084E
5.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
83108
6.INSTALL METER MIRROR SUB-ASSEMBLY (w/ Headup Display)
55950G
7.INSTALL DEFROSTER NOZZLE ASSEMBLY (w/ Headup Display)
55972C
8.INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT (w/ Headup Display)
55971C
9.INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
10.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY