89342
1.REMOVE REAR CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Rear)>REMOVAL
Use the same procedure for the RH side and LH side.
89348R
2.REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Rear)>REMOVAL
Use the same procedure for the RH side and LH side.
82182
3.REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)
Disengage the 2 clamps to remove the No. 2 luggage room wire.
4.REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)
Remove the 2 ultrasonic sensor clips.
81920
5.REMOVE REFLEX REFLECTOR ASSEMBLY LH
Remove the screw.
Disengage the claw and guide to remove the reflex reflector assembly LH.
81910
6.REMOVE REFLEX REFLECTOR ASSEMBLY RH
Use the same procedure as for the LH side.
52705
7.REMOVE REAR BUMPER MOULDING SUB-ASSEMBLY (for Type A)
w/ Rear Bumper Moulding:
Remove the 8 clips.
Disengage the guide to remove the rear bumper moulding sub-assembly.
52169C
8.REMOVE LOWER REAR BUMPER COVER (for Type A)
Remove the 2 screws.
Remove the 2 clips.
Disengage the 12 claws to remove the lower rear bumper cover.
52724
9.REMOVE REAR BUMPER EXTENSION MOULDING LH (for Type B)
Disengage the 4 claws to remove the rear bumper extension moulding LH.
52723
10.REMOVE REAR BUMPER EXTENSION MOULDING RH (for Type B)
Use the same procedure as for the LH side.
52166B
11.REMOVE REAR BUMPER CORNER EXTENSION LH (for Type B)
Disengage the 4 claws and 4 guides to remove the rear bumper corner extension LH.
52165D
12.REMOVE REAR BUMPER CORNER EXTENSION RH (for Type B)
Use the same procedure as for the LH side.
52462
13.REMOVE REAR BUMPER PAD
Remove the rear bumper pad.
Use the same procedure for the RH side and LH side.
64770
14.REMOVE SPARE WHEEL COVER ASSEMBLY
64779E
15.REMOVE SPARE WHEEL COVER TRAY
64725D
16.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
64749E
17.REMOVE LUGGAGE COMPARTMENT DOOR STRIKER COVER
58387
18.REMOVE REAR FLOOR FINISH PLATE
64721
19.REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER RH
64722
20.REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER LH
52576
21.REMOVE REAR BUMPER SIDE RETAINER LH
Remove the screw.
|
Remove in this Direction |
Disengage the 3 clips as shown in the illustration.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the 2 claws as shown in the illustration.
Disengage the guide to remove the rear bumper side retainer LH.
52575
22.REMOVE REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
81560
23.REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
81550
24.REMOVE REAR COMBINATION LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
52563D
25.REMOVE REAR BUMPER UPPER RETAINER LH
Remove the screw and rear bumper upper retainer LH.
52562E
26.REMOVE REAR BUMPER UPPER RETAINER RH
Use the same procedure as for the LH side.
52592
27.REMOVE REAR BUMPER SIDE SEAL LH
Remove the 2 grommets.
for Single Type:
Remove the 3 clips and rear bumper side seal LH.
for Dual Type:
Remove the 2 clips and rear bumper side seal LH.
52591
28.REMOVE REAR BUMPER SIDE SEAL RH
Remove the 2 grommets.
Remove the 2 clips and rear bumper side seal RH.
52615
29.REMOVE REAR BUMPER ENERGY ABSORBER (for Type A)
|
Remove in this Direction |
Disengage the 2 guides to remove the rear bumper energy absorber as shown in the illustration.
52171C
30.REMOVE REAR BUMPER REINFORCEMENT (for Type A)
Remove the 6 bolts and rear bumper reinforcement.
52171C
31.REMOVE REAR BUMPER REINFORCEMENT (for Type B)
Remove the 6 bolts and rear bumper reinforcement.