Home › Engine / Hybrid System › M20A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE › from 2021.02
RM33A0E _51 Engine / Hybrid System _098626 M20A-FKS ENGINE CONTROL _0462095 CAMSHAFT OIL CONTROL VALVE A

M20A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 15370 1.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

Hide 135A0B 2.REMOVE CAMSHAFT TIMING VALVE ASSEMBLY

a.
A484436C01
1.854,1.354 2.552,0.948 2.552,0.948 2,0.948 true 1.604,2.771 1.813,3.01 1.813,3.01 2.094,3.01 true 0.823,2.896 1.031,3.135 1.031,3.135 1.313,3.135 true 2.115,2.917 2.365,3.125 0.25,0.208 10 true *1 1.333,3.031 1.583,3.24 0.25,0.208 10 true *a 2.583,0.865 2.833,1.063 0.25,0.198 10 true *b
*1 Camshaft Timing Valve Assembly
*a Bolt
*b Do not remove


Using a 5 mm hexagon socket wrench, remove the bolt.

NOTICE:

Do not remove the other 2 bolts.


HINT:

If it is difficult to loosen the bolt due to the tools contacting the vehicle body or other parts, rotate the crankshaft to move the bolt to a position where it can be removed easily.



b.

Remove the camshaft timing valve assembly from the camshaft timing exhaust gear assembly.