Home › Engine / Hybrid System › M20A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE › from 2021.02
RM33A0E _51 Engine / Hybrid System _098626 M20A-FKS ENGINE CONTROL _0462095 CAMSHAFT OIL CONTROL VALVE G

M20A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15370 1.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

Hide 135A0B 2.INSPECT CAMSHAFT TIMING VALVE ASSEMBLY

a.
A484435C01
1.698,1.646 1.708,1.104 true 1.635,1.646 1.948,1.844 0.313,0.198 10 true *a
*a Plunger


Check the stroke of the plunger in the center of the camshaft timing valve assembly.

Standard Stroke:

2.2 mm (0.0866 in.) or more


If the result is not as specified, replace the camshaft timing valve assembly.


Hide 15370 3.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY