63342A
1.REMOVE NO. 2 ROOF SILENCER (for Normal Roof)
Remove the No. 2 roof silencer.
63344A
2.REMOVE NO. 4 ROOF SILENCER (for Normal Roof)
Remove the No. 4 roof silencer.
86101J
3.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
82171
4.REMOVE NO. 1 ROOF WIRE (for Normal Roof)
Remove the adhesive tape from the roof headlining assembly.
| *A | w/ Room Light Assembly | *B | w/ Spot Light Assembly |
|
Adhesive Tape | - | - |
Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.
| *A | w/ Room Light Assembly | *B | w/ Spot Light Assembly |
| *C | w/ EC Mirror or Pre-collision System | *D | for LHD with Rain Sensor |
| *a | 90° | - | - |
|
Rotation Direction | - | - |
Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.
82171
5.REMOVE NO. 1 ROOF WIRE (for Moon Roof)
Remove the adhesive tape from the roof headlining assembly.
|
Adhesive Tape | - | - |
Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.
| *a | 90° | - | - |
|
Rotation Direction | - | - |
Disengage the 5 clamps and remove the No. 1 roof wire from the roof headlining assembly.
82171
6.REMOVE NO. 1 ROOF WIRE (for Panoramic Moon Roof)
Remove the adhesive tape from the roof headlining assembly.
|
Adhesive Tape | - | - |
Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.
| *A | for LHD with Rain Sensor | - | - |
| *a | 90° | - | - |
|
Rotation Direction | - | - |
Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.