73960A
1.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
w/o Occupant Classification System:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT PASSENGER AIRBAG ASSEMBLY>REMOVAL
w/ Occupant Classification System:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT PASSENGER AIRBAG ASSEMBLY>REMOVAL
55971C
2.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
|
Remove in this Direction |
Remove the screw <E>.
Disengage the 2 guides as shown in the illustration.
|
Remove in this Direction |
Disengage the claw to remove the No. 1 side defroster nozzle duct as shown in the illustration.
55972C
3.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
|
Remove in this Direction |
Remove the 2 screws <E>.
Disengage the 2 guides as shown in the illustration.
|
Remove in this Direction |
Disengage the claw to remove the No. 2 side defroster nozzle duct as shown in the illustration.
55950G
4.REMOVE DEFROSTER NOZZLE ASSEMBLY
Remove the 3 screws <E> and defroster nozzle assembly.
83108
5.REMOVE METER MIRROR SUB-ASSEMBLY (w/ Headup Display)
55084E
6.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
Remove the 2 screws <E> and No. 1 heater to register duct sub-assembly.
55086
7.REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY
Remove the 2 screws <E> and No. 3 heater to register duct sub-assembly.
8.REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET (w/ Navigation Antenna)
86681B
9.REMOVE ANTENNA DIVIDER (w/ Antenna Divider)
89120A
10.REMOVE AUTOMATIC LIGHT CONTROL SENSOR
82143
11.REMOVE NO. 3 INSTRUMENT PANEL WIRE
Disengage the clamp to remove the No. 3 instrument panel wire.
55417B
12.REMOVE RADIO TUNER FINISH RETAINER
Remove the 5 screws <E> and radio tuner finish retainer.
83107A
13.REMOVE NO. 1 METER BRACKET SUB-ASSEMBLY
Remove the screw <E> and No. 1 meter bracket sub-assembly.
83107B
14.REMOVE NO. 2 METER BRACKET SUB-ASSEMBLY (w/ Headup Display)
Remove the screw <E> and No. 2 meter bracket sub-assembly.
55981
15.REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
Disengage the 4 clips.
Disengage the 5 guides to remove the No. 1 defroster nozzle garnish.
16.REMOVE INSTRUMENT PANEL HOLE COVER (w/ Headup Display)
Disengage the 5 claws.
Disengage the 3 guides to remove the instrument panel hole cover.
55328
17.REMOVE NO. 1 INSTRUMENT PANEL PIN
Remove the 4 screws <E> and 4 No. 1 instrument panel pins.
86101
18.REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)
86101
19.REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)
87201N
20.REMOVE AIR DUCT SUB-ASSEMBLY (w/ Ion Generator)
for RHD:
Click hereVehicle Interior>HEATING / AIR CONDITIONING>ION GENERATOR>REMOVAL
21.REMOVE ION GENERATOR WITH BRACKET (w/ Ion Generator)
82144
22.REMOVE NO. 4 INSTRUMENT PANEL WIRE (w/ Ion Generator)
Disengage the 2 clamps to remove the No. 4 instrument panel wire.
23.REMOVE INSTRUMENT PANEL CUSHION
Remove the instrument panel cushion.
69550A
24.REMOVE GLOVE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/ Glove Compartment Door Lock Cylinder Assembly)
Move the glove compartment door lever as shown in the illustration.
|
Move in this Direction | - | - |
| *a | Cylinder Lock Plate |
|
Remove in this Direction |
Using a screwdriver, press the cylinder lock plate to release it and pull out the glove compartment door lock cylinder assembly from the glove compartment door lever to remove it as shown in the illustration.