Home › Audio / Visual / Telematics › TELEMATICS › MAYDAY BATTERY › from 2021.02
RM33A0E _56 Audio / Visual / Telematics _072211 TELEMATICS _0351486 MAYDAY BATTERY A

TELEMATICS  MAYDAY BATTERY  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Risk of explosion if the battery is replaced by an incorrect type. Replace battery with the same type.

·

Risk of explosion or the leakage of flammable liquid or gas.

-

Do not use in /store in /bring into environment of extremely high temperature or extremely low pressure due to the very high altitude.

-

Do not attempt to burn, crush, or cut used battery.




PROCEDURE

Hide 86725 1.INSTALL MOBILEPHONE BATTERY

a.
E448460C01
0,0 0,0 false
V113147

Install in this Direction


Install the mobilephone battery as shown in the illustration.

NOTICE:

Make sure that the mobilephone battery is securely installed.



b.

Connect the connector.

NOTICE:

Make sure that the connector is connected securely.



c.

Engage the 4 claws to install the transceiver cover.

NOTICE:

Make sure that the transceiver cover is securely installed.



Hide 2.INSTALL TELEMATICS TRANSCEIVER WITH BRACKET

Hide 4.PERFORM INITIALIZATION (for Toyota Connected Services)