Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS TRANSCEIVER › from 2021.02
RM33A0E _56 Audio / Visual / Telematics _072211 TELEMATICS _0351482 TELEMATICS TRANSCEIVER A

TELEMATICS  TELEMATICS TRANSCEIVER  INSTALLATION  


PROCEDURE

Hide 86740 1.INSTALL TELEMATICS TRANSCEIVER

Hide 86841 2.INSTALL NAVIGATION ECU (w/ Navigation System)

Hide 86719A 3.INSTALL NO. 1 TELEPHONE BRACKET

a.

w/o Navigation System:

i.

Install the No. 1 telephone bracket with the screw.



b.

w/ Navigation System:

i.

Install the No. 1 telephone bracket with the 3 screws.



Hide 86719B 4.INSTALL NO. 2 TELEPHONE BRACKET

a.

w/o Navigation System:

i.

Install the No. 2 telephone bracket with the screw.



b.

w/ Navigation System:

i.

Install the No. 2 telephone bracket with the 3 screws.



Hide 86101M 5.INSTALL ANTENNA CORD SUB-ASSEMBLY

a.

w/o Navigation System:

i.

Engage the clamp to install the antenna cord sub-assembly.


ii.

Connect the 3 connectors.



b.

w/ Navigation System:

i.

Engage the clamp to install the antenna cord sub-assembly.


ii.

Connect each connector.



Hide 6.INSTALL TELEMATICS TRANSCEIVER WITH BRACKET

a.

Connect each connector.


b.

Engage the clamp.


c.

Engage the 3 guides.


d.

Install the telematics transceiver with bracket with the 3 bolts.


e.

Connect each connector.


Hide 58805C 7.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 55434B 10.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

Hide 55476C 11.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH

Hide 55420A 12.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55405B 13.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)

Hide 55405B 14.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 7 Inch Display)

Hide 55405B 15.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 9 Inch Display)

Hide 55900 16.INSTALL AIR CONDITIONING CONTROL ASSEMBLY

Hide 18.PERFORM REGISTRATION (for Toyota Connected Services)