Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › from 2021.02
RM33A0E _59 Vehicle Exterior _065397 EXTERIOR PANELS / TRIM _0319663 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  DISASSEMBLY  


PROCEDURE

Hide 89342 1.REMOVE REAR CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89342A 2.REMOVE REAR CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89348R 3.REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89348S 4.REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89342A 5.REMOVE REAR CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89342 6.REMOVE REAR CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89348S 7.REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89348R 8.REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 82182 9.REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

a.

w/o Parking Support Brake System:

i.

for 4 Sensor Type:

1.

Disengage the 2 clamps to remove the No. 2 luggage room wire.

B607511




Hide 82182 10.REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

a.

w/o Parking Support Brake System:

i.

for 6 Sensor Type:

1.

Remove the No. 2 luggage room wire.




Hide 82182 11.REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

a.

w/ Parking Support Brake System:

i.

Remove the No. 2 luggage room wire.



Hide 12.REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

a.

w/o Parking Support Brake System:

i.

for 4 Sensor Type:

1.

Remove the 2 ultrasonic sensor clips.

B489426




Hide 81920 13.REMOVE REFLEX REFLECTOR ASSEMBLY LH

B471285

a.

Remove the screw.


b.
B471286

Disengage the claw and guide to remove the reflex reflector assembly LH.


Hide 81910 14.REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52705 15.REMOVE REAR BUMPER MOULDING SUB-ASSEMBLY (for Type A)

a.

w/ Rear Bumper Moulding:

i.

Remove the 8 clips.

B570875


ii.

Disengage the guide to remove the rear bumper moulding sub-assembly.



Hide 52169C 16.REMOVE LOWER REAR BUMPER COVER (for Type A)

a.

Remove the 2 screws.

B470439


b.

Remove the 2 clips.


c.

Disengage the 12 claws to remove the lower rear bumper cover.

B470440


Hide 52724 17.REMOVE REAR BUMPER EXTENSION MOULDING LH (for Type B)

a.
B471287

Disengage the 4 claws to remove the rear bumper extension moulding LH.


Hide 52723 18.REMOVE REAR BUMPER EXTENSION MOULDING RH (for Type B)

HINT:

Use the same procedure as for the LH side.


Hide 52166B 19.REMOVE REAR BUMPER CORNER EXTENSION LH (for Type B)

a.
B488729

Disengage the 4 claws and 4 guides to remove the rear bumper corner extension LH.


Hide 52165D 20.REMOVE REAR BUMPER CORNER EXTENSION RH (for Type B)

HINT:

Use the same procedure as for the LH side.


Hide 52462 21.REMOVE REAR BUMPER PAD

a.
B471306

Remove the rear bumper pad.

HINT:

Use the same procedure for the RH side and LH side.



Hide 64770 22.REMOVE SPARE WHEEL COVER ASSEMBLY

Hide 64779E 23.REMOVE SPARE WHEEL COVER TRAY

Hide 64725D 24.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 64749E 25.REMOVE LUGGAGE COMPARTMENT DOOR STRIKER COVER

Hide 58387 26.REMOVE REAR FLOOR FINISH PLATE

Hide 64721 27.REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER RH

Hide 64722 28.REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER LH

Hide 52576 29.REMOVE REAR BUMPER SIDE RETAINER LH

a.
B485888

Remove the screw.


b.
B471299C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 3 clips as shown in the illustration.


c.
B471300C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Disengage the 2 claws as shown in the illustration.


d.

Disengage the guide to remove the rear bumper side retainer LH.


Hide 52575 30.REMOVE REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 81560 31.REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

Hide 81550 32.REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52563D 33.REMOVE REAR BUMPER UPPER RETAINER LH

a.
B473306

Remove the screw and rear bumper upper retainer LH.


Hide 52562E 34.REMOVE REAR BUMPER UPPER RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52592 35.REMOVE REAR BUMPER SIDE SEAL LH

a.
B473365

Remove the 2 grommets.


b.
B471302

for Single Type:

i.

Remove the 3 clips and rear bumper side seal LH.



c.
B485390

for Dual Type:

i.

Remove the 2 clips and rear bumper side seal LH.



Hide 52591 36.REMOVE REAR BUMPER SIDE SEAL RH

a.
B473366

Remove the 2 grommets.


b.
B471305

Remove the 2 clips and rear bumper side seal RH.


Hide 52615 37.REMOVE REAR BUMPER ENERGY ABSORBER (for Type A)

a.
B483747C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 guides to remove the rear bumper energy absorber as shown in the illustration.


Hide 52171C 38.REMOVE REAR BUMPER REINFORCEMENT (for Type A)

a.
B483749

Remove the 6 bolts and rear bumper reinforcement.


Hide 52171C 39.REMOVE REAR BUMPER REINFORCEMENT (for Type B)

a.
B483752

Remove the 6 bolts and rear bumper reinforcement.