Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Reclining Seat Type) › from 2021.02
RM33A0E _58 Vehicle Interior _065385 SEAT _0327859 REAR SEAT ASSEMBLY(for Reclining Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Reclining Seat Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 87510T 1.INSTALL REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

Hide 71075B 2.INSTALL BENCH TYPE REAR SEAT CUSHION COVER

HINT:

When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.

Engage the 24 claws.

B470158

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



b.

Engage the 20 hooks.

B470156

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



c.

Using hog ring pliers, install 2 new hog rings.

B478404

NOTICE:
·

Be careful not to damage the bench type rear seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.




d.

Using hog ring pliers, install 6 new hog rings.

B478405

NOTICE:
·

Be careful not to damage the bench type rear seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.




e.

Engage the 6 hooks.

B470153

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



f.

Engage the 4 fasteners to install the bench type rear seat cushion cover to the rear seat cushion pad sub-assembly.

B470152C10
0,0 0,0 false
V100155

Fastener - -


NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



Hide 73733 3.INSTALL CHILD RESTRAINT SEAT BASE COVER

a.
B474270C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide and claw as shown in the illustration.


b.

Install the child restraint seat base cover with the screw.

HINT:

Use the same procedure for all child restraint seat base cover.



Hide 73731 4.INSTALL CHILD RESTRAINT SEAT COVER

a.
B470149C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and 2 claws to install the child restraint seat cover as shown in the illustration.

HINT:

Use the same procedure for all child restraint seat covers.



Hide 72740A 5.INSTALL REAR SEAT RECLINING ADJUSTER ASSEMBLY LH

a.
B489001E01
3.146,0.24 3.292,0.396 0.146,0.156 10 true 1 3.26,1.646 3.406,1.802 0.146,0.156 10 true 2 0.26,3.094 0.406,3.25 0.146,0.156 10 true 3 0.135,0.333 0.281,0.49 0.146,0.156 10 true 4

Install the rear seat reclining adjuster assembly LH with the 2 bolts and 2 nuts in the order shown in the illustration.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Connect the connector.


Hide 72730A 6.INSTALL REAR SEAT RECLINING ADJUSTER ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 71095S 7.INSTALL CENTER SEATBACK COVER SUB-ASSEMBLY (for Center Seat)

a.

Install the center seatback cover sub-assembly to the center seatback pad sub-assembly.


b.
B489008

Engage the 7 hooks to install the center seatback cover with pad to the center seatback frame sub-assembly.


Hide 71931A 8.INSTALL REAR SEAT HEADREST SUPPORT (for Center Seat)

a.
B490993C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.


Hide 82176 9.INSTALL REAR CONSOLE BOX WIRE (for Center Seat)

a.
B489016

Engage the 3 clamps to install the rear console box wire.


b.
B489015

Install the rear seat center armrest pad to the rear seat center armrest box.


Hide 72806D 10.INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for Center Seat)

a.
B489014C01
0,0 0,0 false
V113147

Install in this Direction


Install the rear seat center armrest cup holder sub-assembly with the 2 screws as shown in the illustration.


b.
B489012

Engage the 16 claws to install the 2 rear seat center armrest plates.


c.
B489011

Install the 2 screws and rear seat center armrest cover with pad.


Hide 88660C 11.INSTALL COOLER CONTROL SWITCH ASSEMBLY (for Center Seat)

a.
B489010

Connect the 2 connectors.


b.
B489009

Engage the 4 claws to install the cooler control switch assembly.


Hide 72830 12.INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for Center Seat)

a.
B489007

Engage the 2 clips to install the rear seat center armrest assembly to the rear seat center armrest box assembly.


b.
B489004

Engage the clamp.


Hide 72883A 13.INSTALL NO. 1 REAR SEAT CENTER ARMREST BRACKET (for Center Seat)

a.
B489003

Install the No. 1 rear seat center armrest bracket with the 2 bushes and 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Engage the clamp.


Hide 14.INSTALL REAR CENTER SEATBACK FRAME WITH COVER AND PAD (for Center Seat)

a.
B489002

Engage the 2 claws.


b.

Install the rear center seatback frame with cover and pad with the 2 nuts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 72831B 15.INSTALL NO. 1 REAR SEAT CENTER ARMREST PLATE (for Center Seat)

a.
B493756

w/ Trunk Through:

i.

Engage the 4 guides and 6 claws to install the No. 1 rear seat center armrest plate.



Hide 87510P 16.INSTALL REAR SEATBACK HEATER ASSEMBLY LH (for LH Side)

Hide 71078S 17.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

HINT:

When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.
B488998

Engage the 8 claws to install the separate type rear seatback cover to the separate type rear seatback pad.

NOTICE:

Be careful not to damage the separate type rear seatback cover.



Hide 18.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.

Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly.


b.
B488996

Engage the 13 hooks.


Hide 71931A 19.INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)

a.
B488993C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.


Hide 73344 20.INSTALL REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)

a.
B488991

Engage the guide.


b.

Install the rear seat shoulder belt guide LH with the 2 screws.


Hide 87510Q 21.INSTALL REAR SEATBACK HEATER ASSEMBLY RH (for RH Side)

w/ Seat Heater System:

HINT:

Use the same procedure as for the LH side.


Hide 71078S 22.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 23.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71931A 24.INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 73343 25.INSTALL REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 73345 26.INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)

a.
B488990

Engage the guide.


b.

Install the rear seat center shoulder belt guide with the 2 screws.


Hide 71089A 27.INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)

a.

Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.


Hide 73940A 28.INSTALL REAR SEAT AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag)

Hide 29.INSTALL REAR SIDE SEATBACK COVER WITH PAD (for LH Side)

a.
B488988C01
0,0 0,0 false
V113147

Install in this Direction


Install the rear side seatback cover with pad to the rear side seatback frame sub-assembly LH as shown in the illustration.


b.
B488986

Engage the 11 hooks.


c.

w/ Rear Seat Side Airbag:

i.
B509419

Install the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)



Hide 71088A 30.INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 73930A 31.INSTALL REAR SEAT AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)

HINT:

Use the same procedure as for the LH side.


Hide 32.INSTALL REAR SIDE SEATBACK COVER WITH PAD (for RH Side)

HINT:

Use the same procedure as for the LH side.