Home › Vehicle Exterior › MIRROR (EXT) › POWER MIRROR CONTROL SYSTEM (w/ Memory) › 2021.02–2022.01
RM33A0E _59 Vehicle Exterior _065393 MIRROR (EXT) _0327399 POWER MIRROR CONTROL SYSTEM(w/ Memory) J

MIRROR (EXT)  POWER MIRROR CONTROL SYSTEM(w/ Memory)  AUTO Power Retract Mirrors do not operate  


DESCRIPTION

The outer mirror switch assembly sends the auto retractable outer mirror switch signal to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) sends the auto retract/return signal to the outer mirror control ECU assemblies via CAN communication, which then controls the mirrors.

When the outer mirror control ECU assemblies receive a door lock output signal from the main body ECU (multiplex network body ECU) while the auto retractable outer mirror switch is on, the outer mirror control ECU assemblies operate the retract motors built into the outer rear view mirror assemblies to retract or return the outer rear view mirror assemblies.

WIRING DIAGRAM

B509851E19
0.135,2.302 0.49,2.521 0.354,0.219 10 false O25 0.125,2.469 1.344,2.917 1.219,0.448 10 false Outer Mirror Switch Assembly 1.625,4.375 1.979,4.594 0.354,0.219 10 false K53 1.625,4.542 3.26,4.958 1.635,0.417 10 false Main Body ECU (Multiplex Network Body ECU) 0.688,5.396 2.469,5.677 1.781,0.281 10 false : CAN Communication Line 3.469,4.375 3.823,4.594 0.354,0.219 10 false N10 3.469,4.531 5.031,5.146 1.563,0.615 10 false Outer Mirror Control ECU Assembly (Front Passenger Door) 5.542,1.771 6.51,2 0.969,0.229 10 false O21*1, O22*2 5.573,4.563 6.99,5.156 1.417,0.594 10 false Outer Rear View Mirror Assembly (Front Passenger Door) 5.583,4.385 6.646,4.635 1.063,0.25 10 false N23*1, N24*2 5.542,1.948 6.979,2.427 1.438,0.479 10 false Outer Rear View Mirror Assembly (Driver Door) 5.833,0.583 6.74,1.042 0.906,0.458 10 false Power Retract Mirror Motor 5.635,0.25 5.99,0.469 0.354,0.219 10 false MR 5.646,1.313 6,1.531 0.354,0.219 10 false MF 4.823,0.24 5.177,0.458 0.354,0.219 10 false 3 4.813,1.292 5.167,1.51 0.354,0.219 10 false 11 1.917,0.521 2.385,0.75 0.469,0.229 10 false RET 1.906,1.104 2.375,1.333 0.469,0.229 10 false AMR 1.083,1.698 1.552,1.927 0.469,0.229 10 false E2 0.958,1.094 1.427,1.323 0.469,0.229 10 false MAT 3.469,1.771 3.823,1.99 0.354,0.219 10 false O9 3.458,1.938 5.01,2.427 1.552,0.49 10 false Outer Mirror Control ECU Assembly (Driver Door) 5.833,3.188 6.74,3.646 0.906,0.458 10 false Power Retract Mirror Motor 5.646,2.854 6,3.073 0.354,0.219 10 false MR 4.417,0.354 4.771,0.573 0.354,0.219 10 false MR+ 4.458,1.417 4.813,1.635 0.354,0.219 10 false MR- 4.396,2.958 4.75,3.177 0.354,0.219 10 false MR+ 4.438,4.021 4.792,4.24 0.354,0.219 10 false MR- 1.042,0.521 1.396,0.74 0.354,0.219 10 false MR 4.813,3.906 5.167,4.125 0.354,0.219 10 false 11 4.833,2.833 5.188,3.052 0.354,0.219 10 false 3 5.25,1.135 5.625,1.49 0.375,0.354 10 false 11*1, 20*2 5.26,3.74 5.635,4.115 0.375,0.375 10 false 11*1, 20*2 5.24,2.698 5.542,3.042 0.302,0.344 10 false 3*1, 19*2 1.375,0.99 1.729,1.208 0.354,0.219 10 false 9 1.365,0.396 1.719,0.615 0.354,0.219 10 false 10 1.667,0.396 2.021,0.615 0.354,0.219 10 false 16 1.729,0.99 2.083,1.208 0.354,0.219 10 false 6 1.375,1.573 1.729,1.792 0.354,0.219 10 false 8 5.635,3.917 5.99,4.135 0.354,0.219 10 false MF 2.698,5.51 4.292,5.76 1.594,0.25 10 false *1: for 16 Pin Connector 4.635,5.51 6.229,5.76 1.594,0.25 10 false *2: for 22 Pin Connector 1.719,1.583 1.875,1.781 0.156,0.198 10 false 9 1.906,1.698 2.521,1.896 0.615,0.198 10 false MIRE 5.271,0.083 5.573,0.427 0.302,0.344 10 false 3*1, 19*2

CAUTION / NOTICE / HINT

NOTICE:
·

The power mirror control system (w/ Memory) uses the CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power mirror control system (w/ Memory) after confirming that the communication systems are functioning properly.

Click hereVehicle Exterior>MIRROR (EXT)>POWER MIRROR CONTROL SYSTEM (w/ Memory)>HOW TO PROCEED WITH TROUBLESHOOTING

·

Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.



PROCEDURE

1.CHECK POWER RETRACT MIRROR FUNCTION
a.

Check the power retract mirror function.

Click hereVehicle Exterior>MIRROR (EXT)>POWER MIRROR CONTROL SYSTEM (w/ Memory)>OPERATION CHECK

OK:

Power retract mirror function operates normally.



Result:
Proceed to
OK
NG



OK

2.CHECK POWER DOOR LOCK CONTROL SYSTEM

NG

GO TO OTHER DIAGNOSIS PROCEDURE (Power Retractable Mirrors do not Operate with Power Retract Mirror Switch)

2.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check the power door lock control system.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>OPERATION CHECK

OK:

Power door lock control system is normal.



Result:
Proceed to
OK
NG



OK

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

NG

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Check the wireless door lock control system.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Entry and Start System)>OPERATION CHECK

OK:

Wireless door lock control system is normal.



Result:
Proceed to
OK
NG



OK

4.CHECK SMART ENTRY AND START SYSTEM (for Entry Function)

NG

4.CHECK SMART ENTRY AND START SYSTEM (for Entry Function)
a.

Check the smart entry and start system (for Entry Function).

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>SMART ENTRY AND START SYSTEM (for Entry Function)>OPERATION CHECK

OK:

Smart entry and start system (for Entry Function) is normal.



Result:
Proceed to
OK
NG



OK

5.READ VALUE USING GTS

NG

5.READ VALUE USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Auto Mirror SW Retractable outer mirror switch signal OFF or ON OFF: Retractable outer mirror switch not in auto position
ON: Retractable outer mirror switch in auto position
-
Body Electrical > Main Body > Data List
Tester Display
Auto Mirror SW
50003 123 105
OK:

On the GTS screen, ON or OFF is displayed accordingly.



Result:
Proceed to
OK
NG



OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

6.INSPECT OUTER MIRROR SWITCH ASSEMBLY
6.INSPECT OUTER MIRROR SWITCH ASSEMBLY
a.

Remove the outer mirror switch assembly.

Click hereVehicle Exterior>MIRROR (EXT)>OUTER MIRROR SWITCH>REMOVAL


b.

Inspect the outer mirror switch assembly.

Click hereVehicle Exterior>MIRROR (EXT)>OUTER MIRROR SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

7.CHECK HARNESS AND CONNECTOR (OUTER MIRROR SWITCH ASSEMBLY - MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))

NG

REPLACE OUTER MIRROR SWITCH ASSEMBLY

7.CHECK HARNESS AND CONNECTOR (OUTER MIRROR SWITCH ASSEMBLY - MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))
a.

Disconnect the O25 outer mirror switch assembly.


b.

Disconnect the K53 main body ECU (multiplex network body ECU).


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O25-10 (MR) - K53-16 (RET) Always Below 1 Ω
O25-10 (MR) or K53-16 (RET) - Body ground Always 10 kΩ or higher
O25-9 (MAT) - K53-6 (AMR) Always Below 1 Ω
O25-9 (MAT) or K53-6 (AMR) - Body ground Always 10 kΩ or higher
O25-8 (E2) - K53-9 (MIRE) Always Below 1 Ω
O25-8 (E2) or K53-9 (MIRE) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR