89422A
1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
w/ Canister Pump Module: Click hereEngine / Hybrid System>A25A-FXS (ENGINE CONTROL)>SFI SYSTEM (w/ Canister Pump Module)>INITIALIZATION
w/o Canister Pump Module: Click hereEngine / Hybrid System>A25A-FXS (ENGINE CONTROL)>SFI SYSTEM (w/o Canister Pump Module)>INITIALIZATION
Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
Install the engine coolant temperature sensor to the water outlet with a new clip.
If the engine coolant temperature sensor has been struck or dropped, replace it.
If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
Connect the engine coolant temperature sensor connector.
G9200
2.INSTALL INVERTER WITH CONVERTER ASSEMBLY
89422
3.INSTALL NO. 2 ENGINE COOLANT TEMPERATURE SENSOR (w/ Canister Pump Module)
Apply a light coat of engine coolant to the O-ring of the No. 2 engine coolant temperature sensor.
Install the No. 2 engine coolant temperature sensor to the radiator pipe with a new clip.
If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.
If reusing the No. 2 engine coolant temperature sensor, be sure to inspect the O-ring.
Make sure that the O-ring is not cracked or moved out of place when installing the No. 2 engine coolant temperature sensor.
Connect the No. 2 engine coolant temperature sensor connector.
17750A
4.INSTALL INLET AIR CLEANER ASSEMBLY (w/ Canister Pump Module)
53295E
5.INSTALL COOL AIR INTAKE DUCT SEAL (w/ Canister Pump Module)
6.ADD ENGINE COOLANT (for Engine)
7.INSPECT FOR COOLANT LEAK (for Engine)
8.PERFORM INITIALIZATION
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
w/ Canister Pump Module: Click hereEngine / Hybrid System>A25A-FXS (ENGINE CONTROL)>SFI SYSTEM (w/ Canister Pump Module)>INITIALIZATION
w/o Canister Pump Module: Click hereEngine / Hybrid System>A25A-FXS (ENGINE CONTROL)>SFI SYSTEM (w/o Canister Pump Module)>INITIALIZATION