Home › Engine / Hybrid System › A25A-FXS (ENGINE CONTROL) › ENGINE OIL TEMPERATURE SENSOR › 2017.09–2019.10
RM33C0E _51 Engine / Hybrid System _065419 A25A-FXS ENGINE CONTROL _0326951 ENGINE OIL TEMPERATURE SENSOR A

A25A-FXS ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 53851M 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (w/ Cover)

Hide 53852K 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (w/ Cover)

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER (w/ Cover)

Hide 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (w/ Cover)

Hide 89429F 5.REMOVE ENGINE OIL TEMPERATURE SENSOR

a.
A402374

Disconnect the engine oil temperature sensor connector.


b.
A402375N01
2.031,1.5 2.417,1.5 true 2.427,1.406 2.885,1.604 0.458,0.198 10 true SST

Using SST, remove the engine oil temperature sensor from the cylinder block sub-assembly.

SST
09817-33191  

NOTICE:

If the engine oil temperature sensor has been struck or dropped, replace it.



c.

Remove the gasket from the engine oil temperature sensor.