This DTC is stored when the rear television camera assembly judges that it has an internal CAN malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U1000 | CAN Communication Failure (Message Registry) | Can communication failure (message registry) | Rear television camera assembly |
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
If the DTC is not output again when rechecking for DTCs, it may have been stored due to a temporary CAN malfunction.
If DTC U1000 is stored frequently but is not output when rechecking for DTCs, attempt to reproduce the conditions when the malfunction occurred.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
| Result | Proceed to |
|---|---|
| DTC U1000 is output | A |
| DTC U1000 is not output | B |
A
B
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING