Home › Engine / Hybrid System › A25A-FXS (LUBRICATION) › OIL LEVEL SENSOR
RM33C0E _51 Engine / Hybrid System _065425 A25A-FXS LUBRICATION _0329950 OIL LEVEL SENSOR A

A25A-FXS LUBRICATION  OIL LEVEL SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 53851M 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (w/ Cover)

Hide 53852K 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (w/ Cover)

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER (w/ Cover)

Hide 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (w/ Cover)

Hide 12102A 6.REMOVE NO. 2 OIL PAN SUB-ASSEMBLY

Hide 89491 7.REMOVE ENGINE OIL LEVEL SENSOR

a.

Disconnect the engine oil level sensor connector.


b.
A401897

Remove the clip from the engine oil level sensor.


c.
A401898

Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from engine balancer assembly.