53851M
1.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (w/ Cover)
53852K
2.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (w/ Cover)
51441
3.REMOVE NO. 1 ENGINE UNDER COVER (w/ Cover)
4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (w/ Cover)
5.DRAIN ENGINE COOLANT (for Engine)
6.DRAIN ENGINE OIL
15710
7.REMOVE OIL COOLER ASSEMBLY
| *1 | No. 1 Water By-pass Hose |
| *2 | No. 2 Water By-pass Hose |
Slide the 2 clips and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the oil cooler assembly.
Remove the 4 bolts and oil cooler assembly from the cylinder block sub-assembly.
Remove the 2 oil cooler gaskets from the oil cooler assembly.
w/ Filter:
Remove the oil control valve filter from the cylinder block sub-assembly.