83100
1.INSTALL COMBINATION METER ASSEMBLY
Connect each connector.
Engage the clamp.
|
Install in this Direction |
Engage the 2 clips as shown in the illustration.
Install the combination meter assembly with the 3 screws.
55410C
2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Connect the connector.
|
Install in this Direction |
Engage the 2 guides and 4 clips as shown in the illustration.
Install the 2 clips.
|
Install in this Direction |
Engage the 4 clips and 2 claws to install the instrument cluster finish panel assembly.
55436B
3.INSTALL NO. 2 METER HOOD CLUSTER
55435B
4.INSTALL NO. 1 METER HOOD CLUSTER
5.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
64718C
6.INSTALL LUGGAGE TRIM SERVICE HOLE COVER
7. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)