Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
84233
1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Connect the connector.
Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.
62414A
2.INSTALL LOWER CENTER PILLAR GARNISH
73220
3.CONNECT FRONT SEAT OUTER BELT ASSEMBLY
73233
4.INSTALL LAP BELT OUTER ANCHOR COVER
62332A
5.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
67918A
6.INSTALL REAR DOOR SCUFF PLATE
62312B
7.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
67914
8.INSTALL FRONT DOOR SCUFF PLATE