82142
1.REMOVE NO. 2 INSTRUMENT PANEL WIRE
Disconnect the 2 connectors.
Disengage each clamp to remove the No. 2 instrument panel wire.
87211A
2.REMOVE NO. 2 AIR DUCT
| *a | View A |
|
Front |
Remove the screw.
Disengage the 3 claws to remove the No. 2 air duct.
Be careful not to deform or damage the lower heater case of the air conditioner unit assembly when removing the No. 2 air duct.
88897P
3.REMOVE ASPIRATOR
Disengage the guide and 2 claws to remove the aspirator.
87130D
4.REMOVE BLOWER ASSEMBLY
88650N
5.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
for LHD:
|
Remove in this Direction |
Disconnect the connector.
Remove the screw.
Disengage the guide to remove the air conditioning amplifier assembly as shown in the illustration.
for RHD:
|
Remove in this Direction |
Disconnect the connector.
Remove the screw.
Disengage the guide to remove the air conditioning amplifier assembly as shown in the illustration.
82210K
6.REMOVE AIR CONDITIONING HARNESS ASSEMBLY
for LHD:
| *A | for 3 Zone Type |
Disconnect each connector.
Disengage each clamp to remove the air conditioning harness assembly.
for RHD:
Disconnect each connector.
Disengage each clamp to remove the air conditioning harness assembly.
87114L
7.REMOVE NO. 2 HEATER COVER
for LHD:
Remove the screw.
Disengage the claw and each guide to remove the No. 2 heater cover.
for RHD:
Remove the screw.
Disengage the claw and each guide to remove the No. 2 heater cover.
87710G
8.REMOVE QUICK HEATER ASSEMBLY
|
Remove in this Direction |
Remove the quick heater assembly as shown in the illustration.
88539J
9.REMOVE DRAIN COOLER HOSE
Remove the drain cooler hose.
87050C
10.REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.
87050D
11.REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.
87050E
12.REMOVE NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for 3 Zone Type)
Remove the 2 screws and No. 3 air conditioning radiator damper servo sub-assembly.
87050F
13.REMOVE NO. 4 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
for LHD (for 3 Zone Type):
Remove the 2 screws and No. 4 air conditioning radiator damper servo sub-assembly.
for RHD:
Remove the 2 screws and No. 4 air conditioning radiator damper servo sub-assembly.
88897M
14.REMOVE HEATER PIPE GROMMET
Remove the heater pipe grommet.
87124B
15.REMOVE HEATER CLAMP
Disengage the 3 claws to remove the heater clamp.
87107A
16.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
|
Remove in this Direction |
Remove the heater radiator unit sub-assembly as shown in the illustration.
Prepare a drain pan or cloth in case the coolant leaks.
88899L
17.REMOVE GROMMET SUB-ASSEMBLY
Remove the grommet sub-assembly.
88515
18.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
88501
19.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Remove the 2 screws.
Disengage the 10 claws to remove the upper heater case with No. 1 cooler evaporator sub-assembly from the lower heater case.
Disengage the clamp.
Remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.
88625
20.REMOVE NO. 1 COOLER THERMISTOR