| Lane departure alert system does not operate
|
Power source circuit
|
|
| Steering pad switch circuit
|
|
| CAN communication system
|
|
| Forward recognition camera
|
|
| The lane departure alert indicator does not illuminate even when the lane departure alert main switch is operated
|
Indicator circuit
|
|
| Steering pad switch circuit
|
|
| CAN communication system
|
|
| Combination meter assembly
|
|
| Forward recognition camera
|
|
| Millimeter wave radar sensor assembly
|
|
| The lane departure alert indicator does not turn off even when the lane departure alert main switch is operated
|
Indicator circuit
|
|
| Steering pad switch circuit
|
|
| CAN communication system
|
|
| Combination meter assembly
|
|
| Forward recognition camera
|
|
| Lane departure alert system is not canceled even when turn signal light switch is operated
|
Data List/Active Test
(Check turn signal switch signal)
|
|
| Turn signal switch circuit
|
|
| Forward recognition camera
|
|
| Increase in cases that driver can see lane markers but system cannot detect lane markers
|
Windshield glass is dirty
|
-
|
| Forward recognition camera is dirty
|
-
|
| Headlight assemblies are dirty or worn
|
-
|
| Non-standard suspension is installed
|
-
|
| Non-standard tires are installed
|
-
|
| Non-Toyota genuine windshield glass is installed
|
-
|
| There is a foreign object or foreign matter between the windshield glass and forward recognition camera
|
-
|
| A sticker or similar item is attached to the area in front of the forward recognition camera
|
-
|
| Adjust forward recognition camera
|
|
| Forward recognition camera
|
|
| Lane departure alert system is operating, but no operation condition is displayed on multi-information display in combination meter assembly
|
Data List/Active Test
(Check the item LDA Control)
|
|
| Combination meter assembly
|
|
| Forward recognition camera
|
|
| Buzzer does not sound even when vehicle deviates from its lane
|
Combination meter assembly
|
|
| Forward recognition camera
|
|