Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY › 2017.09–2021.02
RM33C0E _58 Vehicle Interior _065463 SEAT BELT _0332568 FRONT SEAT INNER BELT ASSEMBLY A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 73240 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

a.
B470014C01
0,0 0,0 false
V113147

Install in this Direction


Install the front seat belt anchor plate as shown in the illustration.


b.
B470193C01
0,0 0,0 false
V100155

Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.



c.

Engage each clamp.


d.

Connect each connector.


Hide 73230 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.
B470011C01
0,0 0,0 false
V113147

Install in this Direction


Install the front seat belt anchor plate as shown in the illustration.


b.
B470194C01
0,0 0,0 false
V100155

Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.



c.

w/ Wire Harness:

i.

Engage each clamp.


ii.

Connect each connector.



Hide 3.INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)

Hide 4.INSTALL FRONT SEAT ASSEMBLY (for Power Seat)