According to the panoramic moon roof switch (roof console box sub-assembly) operation, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) operates its built-in motor. Using the panoramic moon roof switch (roof console box sub-assembly), if the sliding roof glass or roof sunshade can be operated normally when 45 seconds or more have elapsed since the power switch was turned off, the key-off operation function may be abnormal.
If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) must be initialized.
Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>INITIALIZATION
The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.
Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.
Check if the key-off operation function of the power window control system operates normally.
Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>OPERATION CHECK
The key-off operation function of the power window control system operates normally.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check the key-off operation function.
Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>OPERATION CHECK
| Result | Proceed to |
|---|---|
| Sliding roof can still be operated even after approximately 45 seconds have elapsed after power switch is turned off | A |
| Roof sunshade can still be operated even after approximately 45 seconds have elapsed after power switch is turned off | B |
A
B