Wear protective gloves. Sharp areas on the parts may injure your hands.
71587
1.INSTALL FRONT SEATBACK EDGE PROTECTOR
72750D
2.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY RH
Install the seatback felt to the lumbar support adjuster assembly RH.
|
Install in this Direction |
Install the lumbar support adjuster assembly RH to the front seatback frame sub-assembly as shown in the illustration.
Engage the 2 claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.
Engage the clamp.
Connect the connector.
3.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
71931
4.INSTALL FRONT SEAT HEADREST SUPPORT
5.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
71861
6.INSTALL FRONT SEAT INNER CUSHION SHIELD RH
71811D
7.INSTALL FRONT SEAT CUSHION SHIELD RH
71848A
8.INSTALL SEAT ADJUSTER COVER CAP RH
72525A
9.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
72551B
10.INSTALL RECLINING HINGE COVER RH
72494
11.INSTALL VERTICAL ADJUSTING HANDLE RH
71073S
12.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
13.INSTALL FRONT SEAT ASSEMBLY RH