Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › from 2018.08
RM33C0E _58 Vehicle Interior _065464 HEATING / AIR CONDITIONING _0329891 AIR CONDITIONING SYSTEM C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  B1441  Air Mix Damper Control Servo Motor Circuit (Passenger Side)  B1446  Air Mix Damper Control Servo Motor Circuit (Driver Side)  


DESCRIPTION

·

B1441: The No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix) to the appropriate position. This adjusts the amount of air passing through the heater core after passing the evaporator and controls the temperature of the output air. The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.

·

B1446: The No. 1 air conditioning radiator damper servo sub-assembly (driver side air mix) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the No. 1 air conditioning radiator damper servo sub-assembly (driver side air mix) to the appropriate position. As a result, the amount of air passing through the heater core after passing through the evaporator is adjusted, and the temperature of the air blowing toward the driver side is controlled. The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.


DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1441 Air Mix Damper Control Servo Motor Circuit (Passenger Side) Air mix damper position sensor value does not change even if air conditioning amplifier assembly operates No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix)
·

No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix)

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly

·

Air conditioning radiator assembly


Memorized
(30 sec. or more)*
B1446 Air Mix Damper Control Servo Motor Circuit (Driver Side) Air mix damper position sensor value does not change even if air conditioning amplifier assembly operates No. 1 air conditioning radiator damper servo sub-assembly (driver side air mix)
·

No. 1 air conditioning radiator damper servo sub-assembly (driver side air mix)

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly

·

Air conditioning radiator assembly


Memorized
(30 sec. or more)*

*: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.


DTC Detection Condition Combination Table
Vehicle Condition
Pattern 1 Pattern 2
Diagnosis Condition No. 1 air conditioning radiator damper servo sub-assembly operating ○ ○
Malfunction Damper servo operation request signals are output but the damper position sensor value does not change ○ -
Damper servo operation request signals are output but the damper position sensor value is abnormal - ○
Detection Time Continuously for 30 seconds or more Continuously for 30 seconds or more
Trip Count 1 trip 1 trip

HINT:

If the conditions of either of these patterns are detected, a DTC will be stored


WIRING DIAGRAM

for LHD


E379772E25
0.594,1.583 1.958,1.771 1.365,0.188 10 false Driver Side Air Mix 0.656,3.583 1.958,3.792 1.302,0.208 10 false Driver Side Mode 0.271,5.563 2.271,5.75 2,0.188 10 false Front Passenger Side Air Mix 6.646,0.438 6.938,0.615 0.292,0.177 10 false +B 6.771,1.469 7.063,1.646 0.292,0.177 10 false IC 2.49,2.854 2.781,3.031 0.292,0.177 10 false IC 0.229,6.333 3.01,6.698 2.781,0.365 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly 0.323,8.552 2.938,8.76 2.615,0.208 10 false No. 1 Blower Damper Servo Sub-assembly 3.573,8.542 5.094,8.875 1.521,0.333 10 false Air Conditioning Harness Assembly 5.531,8.552 7.083,8.885 1.552,0.333 10 false Air Conditioning Amplifier Assembly 0.677,9.531 2.313,9.719 1.635,0.188 10 false : LIN Communication Line


for RHD


E379772E07
0.188,1.594 2.188,1.781 2,0.188 10 false Front Passenger Side Air Mix 0.583,5.563 1.948,5.75 1.365,0.188 10 false Driver Side Air Mix 6.646,0.438 6.938,0.615 0.292,0.177 10 false +B 6.771,1.469 7.063,1.646 0.292,0.177 10 false IC 2.49,2.854 2.781,3.031 0.292,0.177 10 false IC 0.229,6.333 3.01,6.698 2.781,0.365 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly 0.323,8.552 2.938,8.76 2.615,0.208 10 false No. 1 Blower Damper Servo Sub-assembly 3.573,8.542 5.094,8.875 1.521,0.333 10 false Air Conditioning Harness Assembly 5.531,8.552 7.083,8.885 1.552,0.333 10 false Air Conditioning Amplifier Assembly 0.677,9.531 2.313,9.719 1.635,0.188 10 false : LIN Communication Line 0.625,3.583 1.958,3.833 1.333,0.25 10 false Driver Side Mode


CAUTION / NOTICE / HINT

HINT:
·

Confirm that no mechanical problems are present because this DTC can be stored when either a damper link or damper is mechanically locked.

·

When installing a damper servo motor, make sure to install it correctly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>REASSEMBLY

·

After replacing a damper servo motor, make sure to perform Servo Motor Initialization.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>INITIALIZATION



PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Air Conditioner > Trouble Codes
50001 121

Result:
Result Proceed to
Only B1497 is output A
B1441, B1442, B1443 and B1446 are output B
B1441 or B1446 is output C



A

B

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

C

2.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)
2.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)
a.

Check that the No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.

OK:

The No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.



Result:
Proceed to
OK
NG



OK

3.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)

NG

INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY CORRECTLY

3.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)
a.

Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.



Result:
Proceed to
OK
NG



OK

4.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

NG

REMOVE PINCHED WIRE HARNESS

4.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)
a.

Remove the No. 1 air conditioning radiator damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY


b.

Operate the dampers by hand.

OK:

The dampers are easily operated by hand.



Result:
Proceed to
OK
NG



OK

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

NG

REPLACE AIR CONDITIONING RADIATOR ASSEMBLY