Home › Engine / Hybrid System › A25A-FXS (FUEL) › FUEL TANK (w/o Canister Pump Module) › from 2019.02
RM33C0E _51 Engine / Hybrid System _065421 A25A-FXS FUEL _0319777 FUEL TANK(w/o Canister Pump Module) A

A25A-FXS FUEL  FUEL TANK(w/o Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 77289B 1.INSTALL NO. 3 FUEL TUBE CLAMP (for Type A)

a.

Engage the claw to install the No. 3 fuel tube clamp to the fuel tank assembly.


Hide 77651A 2.INSTALL NO. 1 FUEL TANK CUSHION

a.

Install 2 new No. 1 fuel tank cushions to the fuel tank assembly.


Hide 77754B 3.INSTALL CHARCOAL CANISTER OUTLET HOSE

a.

Engage the clamp to install the charcoal canister outlet hose to the fuel tank assembly.


Hide 77209F 4.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Engage the 2 clamps to install the fuel tank main tube sub-assembly to the fuel tank assembly.


Hide 77100 5.INSTALL FUEL TANK ASSEMBLY

CAUTION:
A344817

The fuel tank assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the fuel tank assembly may fall off the engine lifter.


a.

Set the fuel tank assembly on an engine lifter.

NOTICE:

Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.



b.
A405271N02
0.615,1.948 0.729,2.125 0.115,0.177 10 true 1 0.708,0.042 0.823,0.219 0.115,0.177 10 true 2 2.844,0.052 2.958,0.229 0.115,0.177 10 true 3 2.24,1.979 2.354,2.156 0.115,0.177 10 true 4

Using the engine lifter, slowly raise the fuel tank assembly, and then install the fuel tank assembly, No. 1 fuel tank band sub-assembly LH and No. 1 fuel tank band sub-assembly RH with the 4 bolts in the order shown in the illustration.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)

NOTICE:
·

Be careful not to drop the fuel tank assembly.

·

When installing the fuel tank assembly, tilt it slightly to prevent it from interfering with the surrounding parts.




Hide 77213E 6.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.

for Type A:

i.
A405268C02
0.781,4.354 0.865,4.354 0.865,4.354 1.042,4.281 true 1.167,4.25 1.365,4.479 1.365,4.479 1.51,4.479 true 0.927,2.406 1.115,2.552 0.188,0.146 10 true *a 1.375,2.604 1.688,2.76 0.313,0.156 10 false *b 1.271,3.354 1.583,3.51 0.313,0.156 10 false *c 2.479,4.208 2.792,4.365 0.313,0.156 10 false *d 0.615,4.26 0.792,4.406 0.177,0.146 10 true *e 1.563,4.406 1.875,4.563 0.313,0.156 10 false *f 1.708,3.875 2.021,4.094 0.313,0.219 10 false *g
*a Up
*b 120°
*c 10°
*d 0 to 3.0 mm (0 to 0.118 in.)
*e Clamp End
*f Stopper
*g +/- 2.0 mm (0.0787 in.)


Connect the fuel tank to filler pipe hose to the fuel tank assembly and tighten the clamp to secure it.

HINT:
·

Make sure the clamp and fuel tank to filler pipe hose are positioned within the area shown in the illustration.

·

Make sure that the clamp end is positioned within 2.0 mm (0.0787 in.) of the stopper.





b.

for Type B:

i.

Connect the fuel tank to filler pipe hose to the fuel tank assembly.

Click hereEngine / Hybrid System>A25A-FXS (FUEL)>FUEL SYSTEM>PRECAUTION



Hide 7.CONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY

a.

for Type A:

i.
A405266C02
0.813,1.958 1.031,2.125 0.219,0.167 10 true *a 0.375,2.896 0.688,3.052 0.313,0.156 10 false *b 2.438,3.177 2.75,3.333 0.313,0.156 10 false *c 2.406,2 2.719,2.156 0.313,0.156 10 false *d
*a Up
*b 120°
*c 0 to 3.0 mm (0 to 0.118 in.)
*d 2.0 to 7.0 mm (0.0787 to 0.276 in.)


Connect the fuel tank breather tube sub-assembly to the fuel tank filler pipe assembly and tighten the clamp to secure it.

HINT:

Make sure the clamp and fuel tank breather tube sub-assembly are positioned within the area shown in the illustration.




b.

for Type B:

i.

Connect the fuel tank breather tube sub-assembly to the fuel tank filler pipe assembly.

Click hereEngine / Hybrid System>A25A-FXS (FUEL)>FUEL SYSTEM>PRECAUTION



Hide 77754B 8.CONNECT CHARCOAL CANISTER OUTLET HOSE

a.

Connect the charcoal canister outlet hose to the fuel tank filler pipe assembly.


Hide 77209F 9.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Connect the fuel tank main tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>A25A-FXS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77641A 10.INSTALL NO. 1 FUEL TANK PROTECTOR

a.

for Type A:

i.

Engage the clamp to install the No. 1 fuel tank protector to the fuel tank assembly.


ii.

Install the 2 clips.



b.

for Type B:

i.

Install the No. 1 fuel tank protector to the fuel tank assembly with the 3 clips.



Hide 58399D 11.INSTALL NO. 2 FLOOR UNDER COVER (w/ Cover)

Hide 17420 12.INSTALL CENTER EXHAUST PIPE ASSEMBLY

Hide 77020A 13.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 14.ADD FUEL