Home › Engine / Hybrid System › A25A-FXS (FUEL) › FUEL TANK (w/ Canister Pump Module) › from 2021.02
RM33C0E _51 Engine / Hybrid System _065421 A25A-FXS FUEL _0319776 FUEL TANK(w/ Canister Pump Module) A

A25A-FXS FUEL  FUEL TANK(w/ Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 77606 1.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY

a.

Engage the 2 claws to install the No. 1 fuel tank protector sub-assembly to the fuel tank assembly.


Hide 77651A 2.INSTALL NO. 1 FUEL TANK CUSHION

a.

Install 2 new No. 1 fuel tank cushions to the fuel tank assembly.


Hide 77209F 3.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Engage the 2 clamps to install the fuel tank main tube sub-assembly to the fuel tank assembly.


Hide 77100 4.INSTALL FUEL TANK ASSEMBLY

CAUTION:
A344817

The fuel tank assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the fuel tank assembly may fall off the engine lifter.


a.

Set the fuel tank assembly on an engine lifter.

NOTICE:

Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.



b.
A405273N01
0.615,1.958 0.74,2.146 0.125,0.188 10 true 1 0.688,0.021 0.813,0.208 0.125,0.188 10 true 2 2.844,0.063 2.969,0.25 0.125,0.188 10 true 3 2.24,1.979 2.365,2.167 0.125,0.188 10 true 4

Using the engine lifter, slowly raise the fuel tank assembly, and then install the fuel tank assembly, No. 1 fuel tank band sub-assembly LH and No. 1 fuel tank band sub-assembly RH with the 4 bolts in the order shown in the illustration.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)

NOTICE:
·

Be careful not to drop the fuel tank assembly.

·

When installing the fuel tank assembly, tilt it slightly to prevent it from interfering with the surrounding parts.




c.

w/ Breather Tube:

i.

Connect the fuel tank breather tube sub-assembly to the fuel tank filler pipe assembly.

Click hereEngine / Hybrid System>A25A-FXS (FUEL)>FUEL SYSTEM>PRECAUTION



Hide 77213E 5.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.

Connect the fuel tank to filler pipe hose to the fuel tank assembly.

Click hereEngine / Hybrid System>A25A-FXS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77209F 6.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Connect the fuel tank main tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>A25A-FXS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77641A 7.INSTALL NO. 1 FUEL TANK PROTECTOR

a.

Install the No. 1 fuel tank protector to the fuel tank assembly with the 3 clips.


Hide 58399D 8.INSTALL NO. 2 FLOOR UNDER COVER (w/ Cover)

Hide 17420 9.INSTALL CENTER EXHAUST PIPE ASSEMBLY

Hide 77020A 10.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 11.ADD FUEL